| Catalog number | Description | First catalog reference |
|---|---|---|
| Coolant attachments | ||
| 1632 | Drip coolant attachment and flange |
1951
|
| 20-832 | Drip coolant attachment for 12-inch cut-off machine |
1961
|
| 24-823 | Coolant attachment for Toolmaker grinder |
1965
|
| 24-906 | Drop-feed coolant attachment for Toolmaker grinder |
1945
|
| Drill-press attachments | ||
| 14-843 | Tapping attachment for 14-inch drill press, small capacity |
1948
|
| 14-844 | Tapping attachment for 14-inch drill press, larger capacity |
1948
|
| 17-875 | Tapping attachment for 17-inch drill press, small capacity |
1949
|
| 17-876 | Tapping attachment for 17-inch drill press, medium capacity |
1949
|
| 17-877 | Tapping attachment for 17-inch drill press, large capacity |
1949
|
| 49-300 | J-Lock hold-down clamp | |
| 971 | Standard drill-press spindle with keyless chuck |
1937
|
| 972 | Drill-press spindle with balanced geared chuck |
1937
|
| 973 | Drill-press spindle with No. 1 Morse taper hole |
1937
|
| 974 | Hollow drill-press spindle with 1/2-inch hole for router bits |
1937
|
| 977 | Drill-press spindle for shaper cutters with 5/16-inch hole |
1937
|
| 990 | Tapping attachment |
1936
|
| 991 | Drill-press spindle for cup wheel |
1937
|
| 996 | Tapping attachment |
1937
|
| Drilling attachments | ||
| 1362 | Tapping attachment | |
| 1363 | Tapping attachment | |
| Dust collection attachments | ||
| 1292 | Gravity-type dust box for pedestal grinder |
1939
|
| 20-837 | Dust-collector attachment package for cut-off machine |
1945
|
| 20-838 | Dust-collector attachment fittings for 12-inch cut-off machine |
1972
|
| 23-292 | Gravity-type dust box for pedestal grinder |
1972
|
| 23-802 | Dust-collector attachment package for 7-inch standard grinder |
1945
|
| 23-803 | Dust-collector attachment package for 10-inch grinder |
1972
|
| 24-819 | Dust-collector attachment package for Toolmaker grinder |
1945
|
| 31-681 | Dust-collector attachment package for disc-finishing machine |
1961
|
| 31-803 | Metal-dust-collector attachment package for 12-inch disc finisher |
1945
|
| 31-869 | Metal-dust-collector attachment package for 2-1/2-inch belt grinder |
1951
|
| 49-584 | Spray attachment for dust collector |
1961
|
| 49-589 | Vacuum attachment fittings for 6-inch belt sander |
1972
|
| 49-590 | Vacuum attachment fittings for disc finisher on open stand |
1972
|
| 50-140 | Vacuum attachment fittings for disc finisher and combination finishing machine |
1972
|
| 50-141 | Dust-collector attachment kit for 12-inch disc finisher |
1968
|
| Electrical accessories | ||
| 15-811 | Push-button single-phase switch kit | |
| 21-838 | Milling-table travel-limit switch kit | |
| Feed mechanisms | ||
| 1007 | Foot feed for 14-inch drill press |
1940
|
| 1371 | Foot feed for 17-inch drill press |
1937
|
| 14-820 | Foot feed for 14-inch 14-200-series drill press | |
| 15-101 | Cyclematic air feed | |
| 15-820 | Foot feed for 15-inch drill press | |
| 17-215 | Mechanical power feed for 17-inch drill press | |
| 17-800 | Power-feed attachment for 17-inch drill press |
1961
|
| 17-857 | Power feed for 17-inch drill press |
1945
|
| 20-600 | Variable-rate power feed for Series 2000 drill presses | |
| 20-629 | Mechanical power feed for 20-inch drill press | |
| 20-642 | Power-feed attachment for 20-inch drill press |
1961
|
| 21-820 | Variable-rate power table feed for milling machine |
1975
|
| 28-705 | Screw-feed attachment for 20-inch band saw |
1972
|
| 28-708 | Gravity-feed attachment for 20-inch band saw |
1972
|
| 28-825 | Gravity-feed attachment for 20-inch band saw |
1968
|
| 28-852 | Screw feed for 14-inch band saw |
1945
|
| 33-541 | Variable-speed power-feed attachment for radial saw |
1954
|
| 33-544 | Chain-feed attachment for radial saw |
1961
|
| 34-952 | Variable-speed power-feed attachment for tilting-arbor saw |
1961
|
| 461 | Foot-power feed for No. 458 mortising attachment |
1939
|
| Fences | ||
| 1344 | Rip-fence attachment for shaper |
1948
|
| 28-843 | Rip fence for 14-inch band saw |
1948
|
| 28-845 | Rip fence for 14-inch band saw |
1948
|
| 28-855 | 12-inch band-saw rip fence | |
| 28-857 | 24-inch band-saw rip fence | |
| 28-862 | Rip fence for 20-inch band saw |
1951
|
| 34-472 | Extra-long saw-fence guide bars |
2001
|
| 34-897 | Unifence saw guide |
1982
|
| 34-897F | Unifence saw guide | |
| 36-903 | 52-inch Unifence rail |
2001
|
| 36-904 | Unifence saw guide, without rail |
2001
|
| 43-354 | Shaper fence assembly | |
| 78-902 | Biesemeyer T-Square commercial fence assembly, white | |
| 78-911 | Biesemeyer T-Square commercial fence assembly, gray | |
| 893 | Rip-gage attachment with 18-inch guide bars for 14-inch band saw |
1936
|
| 895 | Rip-gage attachment with 32-inch guide bars for 14-inch band saw |
1936
|
| BC30 | Biesemeyer T-Square commercial fence system, model BC30 | |
| BC30W | Biesemeyer T-Square commercial fence system, model BC30W | |
| BC50 | Biesemeyer T-Square commercial fence system, model BC50 | |
| BC50W | Biesemeyer T-Square commercial fence system, model BC50W | |
| Grinding attachments | ||
| 1294 | Plane-blade grinding attachment |
1948
|
| 1296 | Drill grinding attachment |
1945
|
| 22-106 | Knife grinding attachment for 13x5-inch planer |
1951
|
| 22-107 | Knife jointing attachment for 13x5-inch planer |
1951
|
| 22-130 | Knife-grinding attachment for 13x5-inch planer, without motor |
1961
|
| 22-272 | Motor-driven knife-grinding and jointing attachment for 24-inch planer |
1951
|
| 22-426 | Knife grinding attachment for 13x6-inch planer |
1972
|
| 22-502 | Knife-grinding attachment for 24-inch planer |
1972
|
| 22-802 | Knife grinding and jointing attachment for 18-inch planer |
1968
|
| 22-840 | Basic grinding and jointing attachment |
1988
|
| 22-841 | Grinding and jointing attachment for straight-knife cutterheads | |
| 22-842 | Grinding and jointing attachment for helical-carbide cutterheads | |
| 23-294 | Edge-tool grinding attachment |
1972
|
| 23-296 | Drill-grinding attachment |
1988
|
| 23-715 | Knife-grinding attachment for planer and jointer knives up to 16 inches |
1995
|
| 23-845 | Edge-tool grinding attachment |
1968
|
| 24-822 | Tool-and-cutter grinding attachment |
1965
|
| 24-952 | Tool and cutter grinding attachment |
1961
|
| 24-955 | Unihead universal indexing attachment |
1961
|
| 31-690 | Plane-blade grinding attachment for belt-and-disc finishing machine |
1961
|
| 37-306 | Knife grinding and jointing attachment for 8-inch jointer |
1951
|
| 37-310 | Knife grinding and jointing attachment for 6/8-inch jointers | |
| 37-815 | Knife grinding and jointing attachment |
1968
|
| Guards | ||
| 1155 | Abrasive-wheel guard | |
| 1165 | Swing guard for 10-inch tilting-table saw |
1937
|
| 1166 | Splitter with anti-kickback attachment for 10-inch tilting-table saw |
1961
|
| 1173 | Belt guard for 10-inch tilting-table saw |
1945
|
| 1348 | Safety ring guard for shaper |
1945
|
| 1442 | Belt and pulley guard for 24-inch scroll saw |
1939
|
| 1457 | Splitter-mounted guard for Unisaw | |
| 1471 | Super Safe guard for 10-inch circular saw |
1939
|
| 1472 | Swing-back guard for Unisaw | |
| 1473 | Splitter and anti-kickback attachment for Unisaw | |
| 320 | Swing guard for No. 318 circular saw |
1933
|
| 34-412 | See-Thru splitter-mounted blade guard |
2001
|
| 34-471 | Super-Safe guard | |
| 34-639 | Blade guard for 10-inch Unisaw |
1995
|
| 34-671 | Super-Safe splitter-mounted guard |
1961
|
| 34-838 | Blade guard for 10-inch table saw | |
| 34-839 | Blade guard for 9-inch table saw | |
| 34-843 | Unisaw motor cover | |
| 34-885 | Uniguard for 10-inch Unisaw |
1968
|
| 34-935 | Saw guard | |
| 34-936 | Saw guard for 12/14-inch tilting-arbor saw |
1968
|
| 34-937 | Uniguard for 12/14-inch tilting-arbor saw |
1972
|
| 34-965 | Belt and motor-pulley guard |
2001
|
| 406-03-354-0013 | Abrasive-belt guard retrofit kit | |
| 662 | Spring-loaded rear knife guard for 6-inch jointer |
1936
|
| 863 | Swing guard for No. 860 circular saw |
1940
|
| 867 | Splitter attachment for No. 860 saw, without anti-kickback fingers |
1939
|
| 871 | Spring hold-down attachment for circular saw |
1936
|
| 877 | Splitter attachment for No. 860 saw with anti-kickback fingers |
1939
|
| 983 | Spring hold-down set |
1937
|
| 987 | Shaper safety guard for curved work |
1936
|
| Inspection equipment | ||
| 49-505 | Bench center for inspection work |
1945
|
| 49-506 | Indicator support bracket for bench center |
1945
|
| 50-640 | Cast-iron surface plate, 15 x 18 x 3 inches |
1972
|
| 640 | Cast-iron surface plate, 15 x 18 x 3 inches |
1939
|
| 641 | Cast-iron surface plate, 16 x 22 x 3 inches |
1939
|
| Lathe attachments | ||
| 144 | Right-hand screw-on work arbor |
1945
|
| 145 | Left-hand screw-on work arbor |
1945
|
| 1461 | Tool-rest base for 12-inch lathe |
1945
|
| 1462 | Compound slide rest with sub-base for 12-inch lathe |
1945
|
| 1464 | Countershaft unit |
1961
|
| 1468 | Steady rest for 12-inch cast-iron-bed lathe |
1945
|
| 1490 | Ball-bearing center, No. 2 Morse taper |
1945
|
| 25-240 | Four-position carriage stop | |
| 25-651 | Lathe steady rest | |
| 25-656 | Taper attachment for 11-inch metal lathe |
1961
|
| 25-822 | Milling attachment | |
| 25-856 | Taper attachment for 10-inch metal lathe |
1961
|
| 46-430 | Offset tool-support base, 9-inch |
1961
|
| 46-431 | Calibrated 12-inch tool support |
1961
|
| 46-432 | Sanding table for deluxe variable-speed lathe |
1961
|
| 46-440 | Bed filler block, serial 124-9001 and higher |
1961
|
| 46-441 | Bed filler block, below serial 124-9001 |
1961
|
| 46-468 | Steady rest for 12-inch lathe |
1972
|
| 46-469 | Ball-bearing-bar steady rest for 12-inch lathe |
2001
|
| 46-491 | Tool rest for metal spinning |
1961
|
| 46-550 | Steady rest for standard variable-speed lathe |
1961
|
| 46-551 | Tool-support base for standard variable-speed lathe |
1961
|
| 46-840 | Wood-turning duplicator for 11- and 12-inch lathes | |
| 46-850 | Draw bolt for No. 2 Morse taper attachments |
1961
|
| 46-872 | Outboard bowl-turning attachment and bed extension |
1995
|
| 46-891 | 4-inch tool rest for 11-inch lathe |
1961
|
| 46-892 | 6-inch offset tool rest for 11-inch lathe |
1961
|
| 46-893 | 12-inch tool rest for 11-inch lathe |
1961
|
| 46-894 | 24-inch tool rest, 1-inch shank |
1961
|
| 46-905 | Knockout bar for centers and attachments |
1961
|
| 46-916 | Draw bolt for No. 2 Morse taper attachments |
1961
|
| 46-950 | Universal scroll chuck |
1961
|
| 46-951 | 4-inch independent chuck |
1961
|
| 46-961 | Compound slide rest for 12-inch lathe |
1948
|
| 46-963 | Tool holder for boring bars and square tool bits |
1961
|
| 46-965 | Compound slide rest for 11-inch lathe |
1961
|
| 46-970 | Upper and lower board shelves for No. 945 legs |
1961
|
| 690 | 4-inch tool rest |
1945
|
| 692 | 12-inch tool rest |
1945
|
| 694 | 24-inch tool rest |
1945
|
| 695 | Right-angle tool rest |
1945
|
| 697 | Floor stand for tool rests |
1945
|
| 933 | Spur drive center, No. 2 Morse taper |
1945
|
| 934 | Cup center, No. 2 Morse taper |
1945
|
| 935 | Arbor adapter, No. 2 Morse taper |
1961
|
| 936 | 3-inch right-hand faceplate |
1945
|
| 937 | 6-inch right- and left-hand faceplate |
1945
|
| 938 | Left-hand threaded handwheel |
1961
|
| 939 | 60-degree plain center, No. 2 Morse taper |
1945
|
| 940 | Screw center, No. 2 Morse taper |
1945
|
| 965 | Compound slide rest |
1937
|
| 968 | Geared chuck, No. 2 Morse taper |
1945
|
| Lighting | ||
| 1250 | Lamp attachment and safety shield for grinder |
1937
|
| 24-815 | Light attachment for Toolmaker grinder |
1945
|
| 25-657 | Fluorescent lamp attachment for metal lathe |
1961
|
| 25-857 | Flexible gooseneck lamp attachment |
1961
|
| 25-858 | Flexible gooseneck lamp attachment |
1988
|
| 40-882 | Lamp attachment |
1972
|
| 49-358 | Flexible lamp attachment |
1961
|
| 882 | Lamp attachment |
1936
|
| Mortising attachments | ||
| 1381 | Mortising attachment for 17-inch drill press |
1945
|
| 14-611 | Height attachment for hollow-chisel mortiser |
1995
|
| 15-840 | Mortising attachment for 15-inch drill press |
1965
|
| 17-381 | Mortising attachment for 17-inch drill press with 17-882 spindle and 15-830 chuck |
1982
|
| 17-905 | Mortising attachment for drill presses |
1995
|
| 17-924 | Mortising attachment with four chisel-and-bit sets |
2001
|
| 17-935 | Mortising attachment for bench and radial drill presses |
2001
|
| 20-640 | Mortising attachment for 20-inch drill press with No. 2 Morse taper spindle |
1961
|
| 458 | Mortising attachment |
1933
|
| 976 | Mortising attachment for 14-inch Delta and 11-inch Homecraft drill presses |
1937
|
| Planer attachments | ||
| 22-803 | Redi-Set adjustable bed-roll attachment |
1968
|
| 22-804 | Redi-Set adjustable bed-roll attachment, factory installed |
1968
|
| Raising mechanisms | ||
| 1008 | Production-table raising mechanism |
1945
|
| 1380 | Head and table raising mechanism for 17-inch drill press |
1945
|
| 15-008 | Raising mechanism for 15-inch drill press | |
| 15-009 | Table raising mechanism for 15-inch drill press |
1975
|
| 15-010 | Drill-press support collar | |
| 15-030 | Drill-press head counterbalance | |
| 20-661 | Table raising mechanism for 20-inch drill press |
1961
|
| 20-761 | Head raising mechanism for 20-inch drill press |
1972
|
| Sanding attachments | ||
| 1403 | Belt-sander backstop with bracket |
1937
|
| 17-960 | Oscillating spindle-sander attachment for drill presses |
1995
|
| 28-810 | Sanding attachment for 10/14-inch band saw |
1949
|
| 31-403 | Belt-sander backstop with bracket |
1972
|
| 31-425 | Backstand idler unit |
1961
|
| 31-431 | 2-3/4-inch backstand idler unit |
1961
|
| 31-580 | Spindle-sanding attachment for 4x132-inch edge sander |
1995
|
| 40-711 | Sanding attachment for scroll saw |
1972
|
| 46-948 | Lathe sanding table |
1961
|
| 782 | Sanding attachment for No. 785 band saw |
1937
|
| Saw attachments | ||
| 1170 | Tenoner for sliding shaper jig |
1957
|
| 1171 | Spacing collar set for tenoning |
1957
|
| 1172 | Tenoning jig with base plate |
1951
|
| 1186 | Sliding shaper jig |
1961
|
| 180 | Miter gauge |
1933
|
| 20-227 | Band-saw work clamp | |
| 28-193 | Circle-cutting attachment for 14-inch band saw |
1995
|
| 28-406 | Hand-feed resaw attachment |
1951
|
| 28-700 | File-band guide attachment |
1972
|
| 28-704 | Circle-cutting attachment for 20-inch band saw |
1972
|
| 28-984 | Height attachment for 14-inch band saw |
1972
|
| 31-804 | Miter gauge for Homecraft disc sander |
1961
|
| 33-340 | Three-knife rafter notcher and cutterhead |
1957
|
| 33-549 | Safety-return attachment for radial saw |
1968
|
| 33-550 | Safety-return attachment for radial saw |
1968
|
| 33-551 | Cutterhead-return attachment for radial saw |
1995
|
| 33-723 | Cutterhead-return attachment for radial saw |
2001
|
| 34-171 | Spacing collars for tenoning |
1982
|
| 34-172 | Tenoning attachment with base plate |
1972
|
| 34-226 | Miter gauge with narrow guide bar |
1968
|
| 34-227 | Stop rods for No. 34-226 miter gauge |
1968
|
| 34-322 | Miter gauge for bench saw |
1995
|
| 34-556 | Work clamp for sliding table attachment |
1995
|
| 34-568 | Miter-gage clamp attachment |
1982
|
| 34-727 | Miter gauge for 14-inch variety saw |
1961
|
| 34-728 | Double-miter-gauge yoke assembly |
1961
|
| 34-779 | Miter gage |
2001
|
| 34-832 | Stop rods for No. 34-925 miter gauge |
1975
|
| 34-833 | Miter gauge with adjustable positive stops |
1968
|
| 34-869 | Miter-gauge extension for Unifence |
1988
|
| 34-884 | Miter gauge |
1963
|
| 34-895 | Miter gauge |
2001
|
| 34-903 | Homecraft miter gauge |
1948
|
| 34-925 | Auto-Set miter gauge with stop rods |
1961
|
| 34-928 | Deluxe miter gage |
2001
|
| 34-969 | Saber-saw table insert for No. 34-500 saw |
1961
|
| 36-205 | Sliding miter jig |
2001
|
| 40-800 | Saber attachment for 8-inch tilting-arbor saw |
1961
|
| 43-170 | Tenoner for sliding jig |
1982
|
| 43-186 | Sliding shaper jig |
1982
|
| 43-188 | Sliding shaper jig with cam-action clamps |
2001
|
| 430-02-626-0001 | 24-inch scroll-saw drive-shaft retrofit kit | |
| 49-302 | Miter-gauge stop rods with clamps |
1961
|
| 50-864 | Auto-Set miter gauge |
1963
|
| 864 | Miter gage | |
| 865 | Miter-gage clamp attachment |
1957
|
| 894 | Height attachment for 14-inch band saw |
1936
|
| Speed attachments | ||
| 1028 | High-speed multi-speed attachment for 14-inch drill press |
1945
|
| 1029 | Low-speed multi-speed attachment for 14-inch drill press |
1945
|
| 11-140 | Slow-speed attachment for Deltashop 11-inch drill press |
1961
|
| 14-818 | High-speed multi-speed attachment for 14-inch drill press | |
| 14-819 | Low-speed multi-speed attachment for 14-inch drill press | |
| 1444 | Variable-speed attachment for 24-inch scroll saw |
1940
|
| 15-802 | Multi-speed attachment for 15-inch drill press, 1/2-inch-bore motor pulley |
1965
|
| 15-803 | Multi-speed attachment for 15-inch drill press, 5/8-inch-bore motor pulley |
1968
|
| 15-848 | High-speed multi-speed attachment for 15-inch drill press |
1965
|
| 15-849 | Low-speed multi-speed attachment for 15-inch drill press |
1965
|
| 17-860 | Slow-speed attachment for 17-inch drill press |
1945
|
| 20-630 | Slow-speed attachment, No. 2 Morse taper spindle and drive pinion |
1961
|
| 20-631 | Slow-speed attachment, No. 2 Morse taper spindle and No. 3 drive pinion |
1961
|
| 20-632 | Slow-speed attachment, No. 3 Morse taper spindle and No. 2 drive pinion |
1961
|
| 20-633 | Slow-speed attachment, No. 3 Morse taper spindle and drive pinion |
1961
|
| 20-634 | Planetary-gear spindle pulley |
1961
|
| 20-635 | Planetary-gear spindle pulley |
1961
|
| Stands | ||
| 1463 | Lathe bench with top, shelf and cast-iron legs |
1961
|
| 20-902 | Horizontal-band-saw mobility kit | |
| 23-281 | Grinder pedestal | |
| 23-282 | Grinder pedestal | |
| 31-576 | Belt-finisher stand, motor, switch and belt/pulley guard assembly | |
| 31-852 | Cast-iron abrasive-finishing-machine stand |
1945
|
| 31-856 | Belt-finisher stand attachment | |
| 351 | Caster attachment |
1933
|
| 37-302 | Cast-iron jointer stand with belt guard, chip chute, motor plate and cover |
1951
|
| 46-927 | Lathe bench with top, shelf and steel legs |
1945
|
| 49-303 | Pressed-steel bench legs, pair |
1945
|
| 49-359 | Retractable caster attachment | |
| 49-360 | Retractable caster set for No. 50-308 steel stand |
1961
|
| 49-361 | Retractable caster set for No. 50-441 belt-grinder stand |
1961
|
| 49-362 | Retractable caster set for open steel stands |
1957
|
| 49-363 | Retractable caster attachment | |
| 49-364 | Retractable caster attachment | |
| 49-365 | Retractable caster attachment | |
| 50-121 | Enclosed steel stand for 4/6-inch jointers |
1963
|
| 50-277 | Mobile base for 10-inch Contractor's Saw |
2001
|
| 50-285 | Mobile-base extension for 30-inch Unifence |
2001
|
| 50-310 | School-height steel stand, 26-inch |
1961
|
| 50-351 | Caster attachment |
1951
|
| 50-500 | Base cabinet for standard variable-speed lathe |
1961
|
| 50-724 | Retractable caster attachment | |
| 50-725 | Retractable caster attachment | |
| 50-726 | Retractable caster attachment | |
| 667 | Cast-iron jointer stand |
1939
|
| 78-951 | Biesemeyer commercial-fence support legs, white |
2001
|
| 78-953 | Biesemeyer commercial-fence support legs, gray | |
| 886 | Cast-iron band-saw stand |
1945
|
| 945 | Cast-iron lathe legs, pair |
1961
|
| Tables and extensions | ||
| 1006 | Production table with raising mechanism for 14-inch drill press |
1948
|
| 1009 | Production table for 14-inch drill press |
1945
|
| 15-850 | Production table for 15-inch drill press |
1965
|
| 20-300 | Cut-off-saw coolant attachment | |
| 20-840 | Coolant pan attachment |
1951
|
| 34-485 | Sliding table attachment for Unisaw | |
| 34-488 | Sliding-table attachment component | |
| 34-489 | Sliding-table attachment component | |
| 34-545 | Side extension wings, pair | |
| 34-555 | Sliding table attachment |
1995
|
| 34-866 | Table extension for 8-inch tilting-table saw | |
| 34-899 | Auxiliary table for Unifence |
1982
|
| 34-914 | Laminated table board for 36-905 Unifence |
2001
|
| 34-998 | Auxiliary table and shelf for Unifence |
1995
|
| 36-931 | Cast-iron right extension wing, square corners |
2001
|
| 43-349 | Cast-iron extension wing |
2001
|
| 50-302 | Folding outfeed table |
2001
|
| 50-390 | Outfeed-support-table hardware kit |
2001
|
| 866 | Table and rip-fence extension attachment for 8-inch saw |
1940
|