| Catalog number | 1957 | 1963 | 1965 | 1968 | 1972 | 1975 | 1982 | 1988 | 1995 |
|---|---|---|---|---|---|---|---|---|---|
|
15-005
Bench model with standard tilting table, No. 2 Morse taper spindle and Slo-Speed pulley drive; without motor or controls.
|
|
|
|||||||
|
15-006
Bench model with standard tilting table, No. 2 Morse taper spindle and high-speed pulley drive; without motor or controls.
|
|||||||||
|
15-007
Bench model with standard tilting table, 1/2-inch key chuck spindle and Slo-Speed pulley drive; without motor or controls.
|
|||||||||
|
15-008
Bench model with standard tilting table, 1/2-inch key chuck spindle and high-speed pulley drive; without motor or controls.
|
|
|
|
|
|
||||
|
15-205
Floor model with standard tilting table, No. 2 Morse taper spindle and Slo-Speed pulley drive; without motor or controls.
|
|||||||||
|
15-207
Floor model with standard tilting table, 1/2-inch key chuck spindle and Slo-Speed pulley drive; without motor or controls.
|
|||||||||
|
15-208
Floor model with standard tilting table, 1/2-inch key chuck spindle and high-speed pulley drive; without motor or controls.
|
|||||||||
|
15-210
Floor model with production table, No. 2 Morse taper spindle and Slo-Speed pulley drive; without motor or controls.
|
|||||||||
|
15-211
Floor model with production table, No. 2 Morse taper spindle and high-speed pulley drive; without motor or controls.
|
|||||||||
|
15-212
Floor model with production table, 1/2-inch key chuck spindle and Slo-Speed pulley drive; without motor or controls.
|
|||||||||
|
15-213
Floor model with production table, 1/2-inch key chuck spindle and high-speed pulley drive; without motor or controls.
|
|||||||||
|
15-220
1995: Bench model with 6-inch stroke, standard tilting table, 1/2-inch key chuck, hand feed and six-step pulley drive; without motor or controls. 1963: Head only, with 1/2-inch key chuck spindle and high-speed pulley drive; without motor or controls.
|
|
|
|
|
|
||||
|
15-221
1995: Bench model with 6-inch stroke, standard tilting table, 1/2-inch key chuck, hand feed and six-step pulley drive; 3/4 HP single-phase motor, 115/230 volts, push-button switch. 1963: Head only, with No. 2 Morse taper spindle and high-speed pulley drive; without motor or controls.
|
|||||||||
|
15-222
1995: Bench model with 6-inch stroke, standard tilting table, 1/2-inch key chuck, hand feed and six-step pulley drive; 3/4 HP single-phase motor, 115/230 volts, 24-volt magnetic controls with overload protection. 1963: Head only, with No. 2 Morse taper spindle and Slo-Speed pulley drive; without motor or controls.
|
|||||||||
|
15-223
1995: Bench model with 6-inch stroke, standard tilting table, 1/2-inch key chuck, hand feed and six-step pulley drive; 3/4 HP three-phase motor, 230/460 volts, 24-volt magnetic controls with overload protection. 1963: Head only, with 1/2-inch key chuck spindle and Slo-Speed pulley drive; without motor or controls.
|
|||||||||
|
15-305
Bench model with production table, No. 2 Morse taper spindle and Slo-Speed pulley drive; without motor or controls.
|
|
|
|||||||
|
15-306
Bench model with production table, No. 2 Morse taper spindle and high-speed pulley drive; without motor or controls.
|
|||||||||
|
15-307
Bench model with production table, 1/2-inch key chuck spindle and Slo-Speed pulley drive; without motor or controls.
|
|||||||||
|
15-308
Bench model with production table, 1/2-inch key chuck spindle and high-speed pulley drive; without motor or controls.
|
|||||||||
|
15-405
Gang of 2 heads on a production table, No. 2 Morse taper spindles and Slo-Speed pulley drive; without motors or controls.
|
|
|
|
|
|
||||
|
15-406
Gang of 2 heads on a production table, No. 2 Morse taper spindles and high-speed pulley drive; without motors or controls.
|
|||||||||
|
15-407
Gang of 2 heads on a production table, 1/2-inch key chucks and Slo-Speed pulley drive; without motors or controls.
|
|||||||||
|
15-408
Gang of 2 heads on a production table, 1/2-inch key chucks and high-speed pulley drive; without motors or controls.
|
|
|
|
||||||
|
15-410
Gang of 3 heads on a production table, No. 2 Morse taper spindles and Slo-Speed pulley drive; without motors or controls.
|
|||||||||
|
15-411
Gang of 3 heads on a production table, No. 2 Morse taper spindles and high-speed pulley drive; without motors or controls.
|
|||||||||
|
15-412
Gang of 3 heads on a production table, 1/2-inch key chucks and Slo-Speed pulley drive; without motors or controls.
|
|||||||||
|
15-413
Gang of 3 heads on a production table, 1/2-inch key chucks and high-speed pulley drive; without motors or controls.
|
|||||||||
|
15-415
Gang of 4 heads on a production table, No. 2 Morse taper spindles and Slo-Speed pulley drive; without motors or controls.
|
|
||||||||
|
15-416
Gang of 4 heads on a production table, No. 2 Morse taper spindles and high-speed pulley drive; without motors or controls.
|
|||||||||
|
15-417
Gang of 4 heads on a production table, 1/2-inch key chucks and Slo-Speed pulley drive; without motors or controls.
|
|||||||||
|
15-418
Gang of 4 heads on a production table, 1/2-inch key chucks and high-speed pulley drive; without motors or controls.
|
|||||||||
|
15-515
Gang of 5 heads on a production table, No. 2 Morse taper spindles and Slo-Speed pulley drive; without motors or controls.
|
|
|
|
||||||
|
15-516
Gang of 5 heads on a production table, No. 2 Morse taper spindles and high-speed pulley drive; without motors or controls.
|
|||||||||
|
15-517
Gang of 5 heads on a production table, 1/2-inch key chucks and Slo-Speed pulley drive; without motors or controls.
|
|||||||||
|
15-518
Gang of 5 heads on a production table, 1/2-inch key chucks and high-speed pulley drive; without motors or controls.
|
|||||||||
|
15-520
Gang of 6 heads on a production table, No. 2 Morse taper spindles and Slo-Speed pulley drive; without motors or controls.
|
|||||||||
|
15-521
Gang of 6 heads on a production table, No. 2 Morse taper spindles and high-speed pulley drive; without motors or controls.
|
|||||||||
|
15-522
Gang of 6 heads on a production table, 1/2-inch key chucks and Slo-Speed pulley drive; without motors or controls.
|
|||||||||
|
15-523
Gang of 6 heads on a production table, 1/2-inch key chucks and high-speed pulley drive; without motors or controls.
|
|||||||||
|
15-525
Gang of 8 heads on a production table, No. 2 Morse taper spindles and Slo-Speed pulley drive; without motors or controls.
|
|
|
|
||||||
|
15-526
Gang of 8 heads on a production table, No. 2 Morse taper spindles and high-speed pulley drive; without motors or controls.
|
|||||||||
|
15-017
Head only, 1/2-inch key chuck and Slo-Speed pulley drive; without motor or controls.
|
|
|
|
||||||
|
15-018
Head only, 1/2-inch key chuck and high-speed pulley drive; without motor or controls.
|
|||||||||
|
15-027
Utility bench model with standard table, 1/2-inch key chuck and Slo-Speed pulley drive; without motor or controls.
|
|
||||||||
|
15-028
Utility bench model with standard table, 1/2-inch key chuck and high-speed pulley drive; without motor or controls.
|
|||||||||
|
15-037
Utility floor model with standard table, 1/2-inch key chuck and Slo-Speed pulley drive; without motor or controls.
|
|||||||||
|
15-038
Utility floor model with standard table, 1/2-inch key chuck and high-speed pulley drive; without motor or controls.
|
|||||||||
|
15-057
Utility head only, with 1/2-inch key chuck, Slo-Speed pulley drive and full belt guard; without motor or controls.
|
|
|
|||||||
|
15-058
Utility head only, with 1/2-inch key chuck, high-speed pulley drive and full belt guard; without motor or controls.
|
|||||||||
|
15-067
Utility bench model with standard table, 1/2-inch key chuck, Slo-Speed pulley drive and full belt guard; without motor or controls.
|
|||||||||
|
15-068
Utility bench model with standard table, 1/2-inch key chuck, high-speed pulley drive and full belt guard; without motor or controls.
|
|||||||||
|
15-077
Utility floor model with standard table, 1/2-inch key chuck, Slo-Speed pulley drive and full belt guard; without motor or controls.
|
|||||||||
|
15-078
Utility floor model with standard table, 1/2-inch key chuck, high-speed pulley drive and full belt guard; without motor or controls.
|
|||||||||
|
15-341
Floor model with 6-inch stroke, production table, 1/2-inch key chuck, hand feed and variable-speed drive; 3/4 HP single-phase motor, 115/230 volts, push-button switch.
|
|
|
|
|
|||||
|
15-342
Floor model with 6-inch stroke, production table, 1/2-inch key chuck, hand feed and variable-speed drive; 3/4 HP single-phase motor, 115/230 volts, 24-volt magnetic controls with overload protection.
|
|||||||||
|
15-527
Gang of 8 heads on a production table, 1/2-inch key chucks and Slo-Speed pulley drive; without motors or controls.
|
|
|
|
|
|||||
|
15-528
Gang of 8 heads on a production table, 1/2-inch key chucks and high-speed pulley drive; without motors or controls.
|
|||||||||
|
15-309
Floor model with standard table, No. 2 Morse taper and variable-speed drive; without motor or controls.
|
|
||||||||
|
15-310
Floor model with standard table, 1/2-inch key chuck and variable-speed drive; without motor or controls.
|
|||||||||
|
15-311
Floor model with production table, No. 2 Morse taper and variable-speed drive; without motor or controls.
|
|||||||||
|
15-312
Floor model with production table, 1/2-inch key chuck and variable-speed drive; without motor or controls.
|
|||||||||
|
15-313
Bench model with standard table, No. 2 Morse taper and variable-speed drive; without motor or controls.
|
|||||||||
|
15-314
Bench model with standard table, 1/2-inch key chuck and variable-speed drive; without motor or controls.
|
|||||||||
|
15-315
Bench model with production table, No. 2 Morse taper and variable-speed drive; without motor or controls.
|
|||||||||
|
15-316
Bench model with production table, 1/2-inch key chuck and variable-speed drive; without motor or controls.
|
|||||||||
|
15-317
Head only, No. 2 Morse taper and variable-speed drive; without motor or controls.
|
|||||||||
|
15-318
Head only, 1/2-inch key chuck and variable-speed drive; without motor or controls.
|
|||||||||
|
15-321
Bench model with 6-inch stroke, standard tilting table, 1/2-inch key chuck, hand feed and variable-speed drive; 3/4 HP single-phase motor, 115/230 volts, push-button switch.
|
|
|
|
||||||
|
15-322
Bench model with 6-inch stroke, standard tilting table, 1/2-inch key chuck, hand feed and variable-speed drive; 3/4 HP single-phase motor, 115/230 volts, 24-volt magnetic controls with overload protection.
|
|||||||||
|
15-323
Bench model with 6-inch stroke, standard tilting table, 1/2-inch key chuck, hand feed and variable-speed drive; 3/4 HP three-phase motor, 230/460 volts, 24-volt magnetic controls with overload protection.
|
|||||||||
|
15-324
Bench model with 6-inch stroke, standard tilting table, 1/2-inch key chuck, hand feed and variable-speed drive; 3/4 HP three-phase motor, 200 volts, 24-volt magnetic controls with overload protection.
|
|
|
|||||||
|
15-380
Head only, No. 2 Morse taper and six-step pulley drive; without motor or controls.
|
|
||||||||
|
15-381
Head only, 1/2-inch key chuck and six-step pulley drive; without motor or controls.
|
|
||||||||
|
15-382
Bench model with standard table, No. 2 Morse taper and six-step pulley drive; without motor or controls.
|
|||||||||
|
15-383
Bench model with standard table, 1/2-inch key chuck and six-step pulley drive; without motor or controls.
|
|||||||||
|
15-384
Bench model with production table, No. 2 Morse taper and six-step pulley drive; without motor or controls.
|
|||||||||
|
15-385
Bench model with production table, 1/2-inch key chuck and six-step pulley drive; without motor or controls.
|
|||||||||
|
15-387
Floor model with standard table, 1/2-inch key chuck and six-step pulley drive; without motor or controls.
|
|||||||||
|
15-388
Floor model with production table, No. 2 Morse taper and six-step pulley drive; without motor or controls.
|
|||||||||
|
15-389
Floor model with production table, 1/2-inch key chuck and six-step pulley drive; without motor or controls.
|
|||||||||
|
15-224
Bench model with 6-inch stroke, standard tilting table, 1/2-inch key chuck, hand feed and six-step pulley drive; 3/4 HP three-phase motor, 200 volts, 24-volt magnetic controls with overload protection.
|
|
|
|||||||
|
15-231
Floor model with 6-inch stroke, standard tilting table, 1/2-inch key chuck, hand feed and six-step pulley drive; 3/4 HP single-phase motor, 115/230 volts, push-button switch.
|
|
||||||||
|
15-232
Floor model with 6-inch stroke, standard tilting table, 1/2-inch key chuck, hand feed and six-step pulley drive; 3/4 HP single-phase motor, 115/230 volts, 24-volt magnetic controls with overload protection.
|
|||||||||
|
15-233
Floor model with 6-inch stroke, standard tilting table, 1/2-inch key chuck, hand feed and six-step pulley drive; 3/4 HP three-phase motor, 230/460 volts, 24-volt magnetic controls with overload protection.
|
|||||||||
|
15-234
Floor model with 6-inch stroke, standard tilting table, 1/2-inch key chuck, hand feed and six-step pulley drive; 3/4 HP three-phase motor, 200 volts, 24-volt magnetic controls with overload protection.
|
|
|
|||||||
|
15-260
Floor model with 6-inch stroke, production table, 1/2-inch key chuck, hand feed and six-step pulley drive; without motor or controls.
|
|||||||||
|
15-261
Floor model with 6-inch stroke, production table, 1/2-inch key chuck, hand feed and six-step pulley drive; 3/4 HP single-phase motor, 115/230 volts, push-button switch.
|
|||||||||
|
15-262
Floor model with 6-inch stroke, production table, 1/2-inch key chuck, hand feed and six-step pulley drive; 3/4 HP single-phase motor, 115/230 volts, 24-volt magnetic controls with overload protection.
|
|||||||||
|
15-263
Floor model with 6-inch stroke, production table, 1/2-inch key chuck, hand feed and six-step pulley drive; 3/4 HP three-phase motor, 230/460 volts, 24-volt magnetic controls with overload protection.
|
|||||||||
|
15-264
Floor model with 6-inch stroke, production table, 1/2-inch key chuck, hand feed and six-step pulley drive; 3/4 HP three-phase motor, 200 volts, 24-volt magnetic controls with overload protection.
|
|
|
|||||||
|
15-270
6-inch stroke, head only, 1/2-inch key chuck, hand feed and six-step pulley drive; without motor or controls.
|
|||||||||
|
15-271
6-inch stroke, head only, 1/2-inch key chuck, hand feed and six-step pulley drive; 3/4 HP single-phase motor, 115/230 volts, push-button switch.
|
|||||||||
|
15-272
6-inch stroke, head only, 1/2-inch key chuck, hand feed and six-step pulley drive; 3/4 HP single-phase motor, 115/230 volts, 24-volt magnetic controls with overload protection.
|
|||||||||
|
15-273
6-inch stroke, head only, 1/2-inch key chuck, hand feed and six-step pulley drive; 3/4 HP three-phase motor, 230/460 volts, 24-volt magnetic controls with overload protection.
|
|||||||||
|
15-274
6-inch stroke, head only, 1/2-inch key chuck, hand feed and six-step pulley drive; 3/4 HP three-phase motor, 200 volts, 24-volt magnetic controls with overload protection.
|
|
||||||||
|
15-331
Floor model with 6-inch stroke, standard tilting table, 1/2-inch key chuck, hand feed and variable-speed drive; 3/4 HP single-phase motor, 115/230 volts, push-button switch.
|
|||||||||
|
15-332
Floor model with 6-inch stroke, standard tilting table, 1/2-inch key chuck, hand feed and variable-speed drive; 3/4 HP single-phase motor, 115/230 volts, 24-volt magnetic controls with overload protection.
|
|||||||||
|
15-333
Floor model with 6-inch stroke, standard tilting table, 1/2-inch key chuck, hand feed and variable-speed drive; 3/4 HP three-phase motor, 230/460 volts, 24-volt magnetic controls with overload protection.
|
|||||||||
|
15-334
Floor model with 6-inch stroke, standard tilting table, 1/2-inch key chuck, hand feed and variable-speed drive; 3/4 HP three-phase motor, 200 volts, 24-volt magnetic controls with overload protection.
|
|
||||||||
|
15-343
Floor model with 6-inch stroke, production table, 1/2-inch key chuck, hand feed and variable-speed drive; 3/4 HP three-phase motor, 230/460 volts, 24-volt magnetic controls with overload protection.
|
|||||||||
|
15-344
Floor model with 6-inch stroke, production table, 1/2-inch key chuck, hand feed and variable-speed drive; 3/4 HP three-phase motor, 200 volts, 24-volt magnetic controls with overload protection.
|
|
|
|||||||
|
15-351
6-inch stroke, head only, 1/2-inch key chuck, hand feed and variable-speed drive; 3/4 HP single-phase motor, 115/230 volts, push-button switch.
|
|||||||||
|
15-352
6-inch stroke, head only, 1/2-inch key chuck, hand feed and variable-speed drive; 3/4 HP single-phase motor, 115/230 volts, 24-volt magnetic controls with overload protection.
|
|||||||||
|
15-353
6-inch stroke, head only, 1/2-inch key chuck, hand feed and variable-speed drive; 3/4 HP three-phase motor, 230/460 volts, 24-volt magnetic controls with overload protection.
|
|||||||||
|
15-354
6-inch stroke, head only, 1/2-inch key chuck, hand feed and variable-speed drive; 3/4 HP three-phase motor, 200 volts, 24-volt magnetic controls with overload protection.
|
|
|