17-inch Drill Press (original design) — Other catalog numbers

Back to 17-inch Drill Press (original design)

Catalog numbers

Catalog number 1937 1939 1945 1949 1951 1954 1957
1375
Bench model with production table and No. 2 Morse taper spindle; without motor.
1376
Floor model with tilting table and built-in geared chuck; without motor.
1377
Bench model with production table and built-in geared chuck; without motor.
1378
Head only, with No. 2 Morse taper spindle, belt and pulley; column, table, base and motor extra.
1379
Head only, with built-in geared chuck, belt and pulley; column, table, base and motor extra.
1370-H
High-speed floor model with tilting table and No. 2 Morse taper spindle; without motor.
1375-H
High-speed bench model with production table and No. 2 Morse taper spindle; without motor.
1376-H
High-speed floor model with tilting table and built-in geared chuck; without motor.
1377-H
High-speed bench model with production table and built-in geared chuck; without motor.
17-206
Floor model with standard table, No. 2 Morse taper, high-speed pulley drive and hand feed; without motor or controls.
17-207
Floor model with standard table, 1/2-inch key chuck, Slo-Speed pulley drive and hand feed; without motor or controls.
17-208
Floor model with standard table, 1/2-inch key chuck, high-speed pulley drive and hand feed; without motor or controls.
17-210
Slo-Speed floor model with production table, hand feed and No. 2 Morse-taper spindle; motor extra.
17-211
Floor model with production table, No. 2 Morse taper, high-speed pulley drive and hand feed; without motor or controls.
17-212
Floor model with production table, 1/2-inch key chuck, Slo-Speed pulley drive and hand feed; without motor or controls.
17-213
Floor model with production table, 1/2-inch key chuck, high-speed pulley drive and hand feed; without motor or controls.
17-260
Floor model with production table, No. 2 Morse taper, Slo-Speed pulley drive and power feed; without motor or controls.
17-261
Floor model with production table, No. 2 Morse taper, high-speed pulley drive and power feed; without motor or controls.
17-262
Floor model with production table, 1/2-inch key chuck, Slo-Speed pulley drive and power feed; without motor or controls.
17-263
Floor model with production table, 1/2-inch key chuck, high-speed pulley drive and power feed; without motor or controls.
17-305
Bench model with production table, No. 2 Morse taper, Slo-Speed pulley drive and hand feed; without motor or controls.
17-306
Bench model with production table, No. 2 Morse taper, high-speed pulley drive and hand feed; without motor or controls.
17-307
Bench model with production table, 1/2-inch key chuck, Slo-Speed pulley drive and hand feed; without motor or controls.
17-308
Bench model with production table, 1/2-inch key chuck, high-speed pulley drive and hand feed; without motor or controls.
17-355
Bench model with production table, No. 2 Morse taper, Slo-Speed pulley drive and power feed; without motor or controls.
17-356
Bench model with production table, No. 2 Morse taper, high-speed pulley drive and power feed; without motor or controls.
17-357
Bench model with production table, 1/2-inch key chuck, Slo-Speed pulley drive and power feed; without motor or controls.
17-358
Bench model with production table, 1/2-inch key chuck, high-speed pulley drive and power feed; without motor or controls.
17-405
Two-head gang on a one-piece production table, No. 2 Morse taper, Slo-Speed pulley drive and hand feed; without motor or controls.
17-406
Two-head gang on a one-piece production table, No. 2 Morse taper, high-speed pulley drive and hand feed; without motor or controls.
17-407
Two-head gang on a one-piece production table, 1/2-inch key chuck, Slo-Speed pulley drive and hand feed; without motor or controls.
17-408
Two-head gang on a one-piece production table, 1/2-inch key chuck, high-speed pulley drive and hand feed; without motor or controls.
17-410
Four-head gang on a one-piece production table, No. 2 Morse taper, Slo-Speed pulley drive and hand feed; without motor or controls.
17-412
Four-head gang on a one-piece production table, 1/2-inch key chuck, Slo-Speed pulley drive and hand feed; without motor or controls.
17-413
Four-head gang on a one-piece production table, 1/2-inch key chuck, high-speed pulley drive and hand feed; without motor or controls.
17-455
Two-head gang on a one-piece production table, No. 2 Morse taper, Slo-Speed pulley drive and power feed; without motor or controls.
17-456
Two-head gang on a one-piece production table, No. 2 Morse taper, high-speed pulley drive and power feed; without motor or controls.
17-457
Two-head gang on a one-piece production table, 1/2-inch key chuck, Slo-Speed pulley drive and power feed; without motor or controls.
17-458
Two-head gang on a one-piece production table, 1/2-inch key chuck, high-speed pulley drive and power feed; without motor or controls.
17-460
Four-head gang on a one-piece production table, No. 2 Morse taper, Slo-Speed pulley drive and power feed; without motor or controls.
17-461
Four-head gang on a one-piece production table, No. 2 Morse taper, high-speed pulley drive and power feed; without motor or controls.
17-462
Four-head gang on a one-piece production table, 1/2-inch key chuck, Slo-Speed pulley drive and power feed; without motor or controls.
17-463
Four-head gang on a one-piece production table, 1/2-inch key chuck, high-speed pulley drive and power feed; without motor or controls.
17-505
Three-head gang on a sectional production table, No. 2 Morse taper, Slo-Speed pulley drive and hand feed; without motor or controls.
17-506
Three-head gang on a sectional production table, No. 2 Morse taper, high-speed pulley drive and hand feed; without motor or controls.
17-507
Three-head gang on a sectional production table, 1/2-inch key chuck, Slo-Speed pulley drive and hand feed; without motor or controls.
17-508
Three-head gang on a sectional production table, 1/2-inch key chuck, high-speed pulley drive and hand feed; without motor or controls.
17-510
Four-head gang on a sectional production table, No. 2 Morse taper, Slo-Speed pulley drive and hand feed; without motor or controls.
17-511
Four-head gang on a sectional production table, No. 2 Morse taper, high-speed pulley drive and hand feed; without motor or controls.
17-512
Four-head gang on a sectional production table, 1/2-inch key chuck, Slo-Speed pulley drive and hand feed; without motor or controls.
17-513
Four-head gang on a sectional production table, 1/2-inch key chuck, high-speed pulley drive and hand feed; without motor or controls.
17-515
Five-head gang on a sectional production table, No. 2 Morse taper, Slo-Speed pulley drive and hand feed; without motor or controls.
17-516
Five-head gang on a sectional production table, No. 2 Morse taper, high-speed pulley drive and hand feed; without motor or controls.
17-517
Five-head gang on a sectional production table, 1/2-inch key chuck, Slo-Speed pulley drive and hand feed; without motor or controls.
17-518
Five-head gang on a sectional production table, 1/2-inch key chuck, high-speed pulley drive and hand feed; without motor or controls.
17-520
Six-head gang on a sectional production table, No. 2 Morse taper, Slo-Speed pulley drive and hand feed; without motor or controls.
17-521
Six-head gang on a sectional production table, No. 2 Morse taper, high-speed pulley drive and hand feed; without motor or controls.
17-522
Six-head gang on a sectional production table, 1/2-inch key chuck, Slo-Speed pulley drive and hand feed; without motor or controls.
17-523
Six-head gang on a sectional production table, 1/2-inch key chuck, high-speed pulley drive and hand feed; without motor or controls.
17-525
Eight-head gang on a sectional production table, No. 2 Morse taper, Slo-Speed pulley drive and hand feed; without motor or controls.
17-526
Eight-head gang on a sectional production table, No. 2 Morse taper, high-speed pulley drive and hand feed; without motor or controls.
17-527
Eight-head gang on a sectional production table, 1/2-inch key chuck, Slo-Speed pulley drive and hand feed; without motor or controls.
17-528
Eight-head gang on a sectional production table, 1/2-inch key chuck, high-speed pulley drive and hand feed; without motor or controls.
17-555
Three-head gang on a sectional production table, No. 2 Morse taper, Slo-Speed pulley drive and power feed; without motor or controls.
17-556
Three-head gang on a sectional production table, No. 2 Morse taper, high-speed pulley drive and power feed; without motor or controls.
17-557
Three-head gang on a sectional production table, 1/2-inch key chuck, Slo-Speed pulley drive and power feed; without motor or controls.
17-558
Three-head gang on a sectional production table, 1/2-inch key chuck, high-speed pulley drive and power feed; without motor or controls.
17-560
Four-head gang on a sectional production table, No. 2 Morse taper, Slo-Speed pulley drive and power feed; without motor or controls.
17-561
Four-head gang on a sectional production table, No. 2 Morse taper, high-speed pulley drive and power feed; without motor or controls.
17-562
Four-head gang on a sectional production table, 1/2-inch key chuck, Slo-Speed pulley drive and power feed; without motor or controls.
17-563
Four-head gang on a sectional production table, 1/2-inch key chuck, high-speed pulley drive and power feed; without motor or controls.
17-565
Five-head gang on a sectional production table, No. 2 Morse taper, Slo-Speed pulley drive and power feed; without motor or controls.
17-566
Five-head gang on a sectional production table, No. 2 Morse taper, high-speed pulley drive and power feed; without motor or controls.
17-567
Five-head gang on a sectional production table, 1/2-inch key chuck, Slo-Speed pulley drive and power feed; without motor or controls.
17-568
Five-head gang on a sectional production table, 1/2-inch key chuck, high-speed pulley drive and power feed; without motor or controls.
17-570
Six-head gang on a sectional production table, No. 2 Morse taper, Slo-Speed pulley drive and power feed; without motor or controls.
17-571
Six-head gang on a sectional production table, No. 2 Morse taper, high-speed pulley drive and power feed; without motor or controls.
17-572
Six-head gang on a sectional production table, 1/2-inch key chuck, Slo-Speed pulley drive and power feed; without motor or controls.
17-573
Six-head gang on a sectional production table, 1/2-inch key chuck, high-speed pulley drive and power feed; without motor or controls.
17-575
Eight-head gang on a sectional production table, No. 2 Morse taper, Slo-Speed pulley drive and power feed; without motor or controls.
17-576
Eight-head gang on a sectional production table, No. 2 Morse taper, high-speed pulley drive and power feed; without motor or controls.
17-577
Eight-head gang on a sectional production table, 1/2-inch key chuck, Slo-Speed pulley drive and power feed; without motor or controls.
17-578
Eight-head gang on a sectional production table, 1/2-inch key chuck, high-speed pulley drive and power feed; without motor or controls.
17-200
Head only, No. 2 Morse taper, Slo-Speed pulley drive and hand feed; without motor or controls.
17-201
Head only, No. 2 Morse taper, high-speed pulley drive and hand feed; without motor or controls.
17-203
Head only, 1/2-inch key chuck, high-speed pulley drive and hand feed; without motor or controls.
17-220
Head only, No. 2 Morse taper, Slo-Speed pulley drive and power feed; without motor or controls.
17-221
Head only, No. 2 Morse taper, high-speed pulley drive and power feed; without motor or controls.
17-222
Head only, 1/2-inch key chuck, Slo-Speed pulley drive and power feed; without motor or controls.
17-223
Head only, 1/2-inch key chuck, high-speed pulley drive and power feed; without motor or controls.
17-411
Four-head gang on a one-piece production table, No. 2 Morse taper, high-speed pulley drive and hand feed; without motor or controls.
17-202
Head only, 1/2-inch key chuck, Slo-Speed pulley drive and hand feed; without motor or controls.