| Catalog number | 1963 | 1965 | 1968 | 1972 | 1975 | 1982 | 1988 | 1995 |
|---|---|---|---|---|---|---|---|---|
|
17-600
Head only, No. 2 Morse taper spindle, Slo-Speed pulley drive and hand feed; without motor or controls.
|
|
|
|
|
|
|||
|
17-601
Head only, No. 2 Morse taper spindle, high-speed pulley drive and hand feed; without motor or controls.
|
||||||||
|
17-602
Head only, 1/2-inch key chuck, Slo-Speed pulley drive and hand feed; without motor or controls.
|
||||||||
|
17-603
Head only, 1/2-inch key chuck, high-speed pulley drive and hand feed; without motor or controls.
|
||||||||
|
17-606
Floor model with standard table, No. 2 Morse taper spindle, high-speed pulley drive and hand feed; without motor or controls.
|
|
|
||||||
|
17-607
Floor model with standard table, 1/2-inch key chuck, Slo-Speed pulley drive and hand feed; without motor or controls.
|
||||||||
|
17-608
Floor model with standard table, 1/2-inch key chuck, high-speed pulley drive and hand feed; without motor or controls.
|
||||||||
|
17-610
Floor model with production table, No. 2 Morse taper spindle, Slo-Speed pulley drive and hand feed; without motor or controls.
|
|
|||||||
|
17-611
Floor model with production table, No. 2 Morse taper spindle, high-speed pulley drive and hand feed; without motor or controls.
|
||||||||
|
17-612
Floor model with production table, 1/2-inch key chuck, Slo-Speed pulley drive and hand feed; without motor or controls.
|
||||||||
|
17-613
Floor model with production table, 1/2-inch key chuck, high-speed pulley drive and hand feed; without motor or controls.
|
||||||||
|
17-620
Head only, No. 2 Morse taper spindle, Slo-Speed pulley drive and power feed; without motor or controls.
|
|
|||||||
|
17-621
Head only, No. 2 Morse taper spindle, high-speed pulley drive and power feed; without motor or controls.
|
||||||||
|
17-622
Head only, 1/2-inch key chuck, Slo-Speed pulley drive and power feed; without motor or controls.
|
||||||||
|
17-623
Head only, 1/2-inch key chuck, high-speed pulley drive and power feed; without motor or controls.
|
||||||||
|
17-624
Floor model with production table, No. 2 Morse taper spindle, Slo-Speed pulley drive and power feed; without motor or controls.
|
|
|||||||
|
17-625
Floor model with production table, No. 2 Morse taper spindle, high-speed pulley drive and power feed; without motor or controls.
|
||||||||
|
17-626
Floor model with production table, 1/2-inch key chuck, Slo-Speed pulley drive and power feed; without motor or controls.
|
||||||||
|
17-627
Floor model with production table, 1/2-inch key chuck, high-speed pulley drive and power feed; without motor or controls.
|
||||||||
|
17-630
Bench model with production table, No. 2 Morse taper spindle, Slo-Speed pulley drive and hand feed; without motor or controls.
|
|
|
|
|||||
|
17-631
Bench model with production table, No. 2 Morse taper spindle, high-speed pulley drive and hand feed; without motor or controls.
|
||||||||
|
17-632
Bench model with production table, 1/2-inch key chuck, Slo-Speed pulley drive and hand feed; without motor or controls.
|
||||||||
|
17-633
Bench model with production table, 1/2-inch key chuck, high-speed pulley drive and hand feed; without motor or controls.
|
||||||||
|
17-634
Bench model with production table, No. 2 Morse taper spindle, Slo-Speed pulley drive and power feed; without motor or controls.
|
||||||||
|
17-635
Bench model with production table, No. 2 Morse taper spindle, high-speed pulley drive and power feed; without motor or controls.
|
|
|
|
|
|
|||
|
17-636
Bench model with production table, 1/2-inch key chuck, Slo-Speed pulley drive and power feed; without motor or controls.
|
||||||||
|
17-637
Bench model with production table, 1/2-inch key chuck, high-speed pulley drive and power feed; without motor or controls.
|
||||||||
|
17-640
Gang of 2 heads on a one-piece production table, No. 2 Morse taper spindles, Slo-Speed pulley drive and hand feed; without motors or controls.
|
|
|
|
|
||||
|
17-641
Gang of 2 heads on a one-piece production table, No. 2 Morse taper spindles, high-speed pulley drive and hand feed; without motors or controls.
|
||||||||
|
17-642
Gang of 2 heads on a one-piece production table, 1/2-inch key chucks, Slo-Speed pulley drive and hand feed; without motors or controls.
|
||||||||
|
17-643
Gang of 2 heads on a one-piece production table, 1/2-inch key chucks, high-speed pulley drive and hand feed; without motors or controls.
|
||||||||
|
17-644
Gang of 2 heads on a one-piece production table, No. 2 Morse taper spindles, Slo-Speed pulley drive and power feed; without motors or controls.
|
||||||||
|
17-645
Gang of 2 heads on a one-piece production table, No. 2 Morse taper spindles, high-speed pulley drive and power feed; without motors or controls.
|
||||||||
|
17-646
Gang of 2 heads on a one-piece production table, 1/2-inch key chucks, Slo-Speed pulley drive and power feed; without motors or controls.
|
||||||||
|
17-647
Gang of 2 heads on a one-piece production table, 1/2-inch key chucks, high-speed pulley drive and power feed; without motors or controls.
|
||||||||
|
17-650
Gang of 3 heads on a sectional production table, No. 2 Morse taper spindles, Slo-Speed pulley drive and hand feed; without motors or controls.
|
|
|
|
|||||
|
17-651
Gang of 3 heads on a sectional production table, No. 2 Morse taper spindles, high-speed pulley drive and hand feed; without motors or controls.
|
||||||||
|
17-652
Gang of 3 heads on a sectional production table, 1/2-inch key chucks, Slo-Speed pulley drive and hand feed; without motors or controls.
|
||||||||
|
17-653
Gang of 3 heads on a sectional production table, 1/2-inch key chucks, high-speed pulley drive and hand feed; without motors or controls.
|
||||||||
|
17-654
Gang of 3 heads on a sectional production table, No. 2 Morse taper spindles, Slo-Speed pulley drive and power feed; without motors or controls.
|
||||||||
|
17-655
Gang of 3 heads on a sectional production table, No. 2 Morse taper spindles, high-speed pulley drive and power feed; without motors or controls.
|
||||||||
|
17-656
Gang of 3 heads on a sectional production table, 1/2-inch key chucks, Slo-Speed pulley drive and power feed; without motors or controls.
|
||||||||
|
17-657
Gang of 3 heads on a sectional production table, 1/2-inch key chucks, high-speed pulley drive and power feed; without motors or controls.
|
||||||||
|
17-660
Gang of 4 heads on a one-piece production table, No. 2 Morse taper spindles, Slo-Speed pulley drive and hand feed; without motors or controls.
|
|
|
|
|||||
|
17-661
Gang of 4 heads on a one-piece production table, No. 2 Morse taper spindles, high-speed pulley drive and hand feed; without motors or controls.
|
||||||||
|
17-662
Gang of 4 heads on a one-piece production table, 1/2-inch key chucks, Slo-Speed pulley drive and hand feed; without motors or controls.
|
||||||||
|
17-663
Gang of 4 heads on a one-piece production table, 1/2-inch key chucks, high-speed pulley drive and hand feed; without motors or controls.
|
||||||||
|
17-664
Gang of 4 heads on a one-piece production table, No. 2 Morse taper spindles, Slo-Speed pulley drive and power feed; without motors or controls.
|
||||||||
|
17-665
Gang of 4 heads on a one-piece production table, No. 2 Morse taper spindles, high-speed pulley drive and power feed; without motors or controls.
|
||||||||
|
17-666
Gang of 4 heads on a one-piece production table, 1/2-inch key chucks, Slo-Speed pulley drive and power feed; without motors or controls.
|
||||||||
|
17-667
Gang of 4 heads on a one-piece production table, 1/2-inch key chucks, high-speed pulley drive and power feed; without motors or controls.
|
||||||||
|
17-670
Gang of 4 heads on a sectional production table, No. 2 Morse taper spindles, Slo-Speed pulley drive and hand feed; without motors or controls.
|
||||||||
|
17-671
Gang of 4 heads on a sectional production table, No. 2 Morse taper spindles, high-speed pulley drive and hand feed; without motors or controls.
|
||||||||
|
17-672
Gang of 4 heads on a sectional production table, 1/2-inch key chucks, Slo-Speed pulley drive and hand feed; without motors or controls.
|
||||||||
|
17-673
Gang of 4 heads on a sectional production table, 1/2-inch key chucks, high-speed pulley drive and hand feed; without motors or controls.
|
||||||||
|
17-674
Gang of 4 heads on a sectional production table, No. 2 Morse taper spindles, Slo-Speed pulley drive and power feed; without motors or controls.
|
||||||||
|
17-675
Gang of 4 heads on a sectional production table, No. 2 Morse taper spindles, high-speed pulley drive and power feed; without motors or controls.
|
||||||||
|
17-676
Gang of 4 heads on a sectional production table, 1/2-inch key chucks, Slo-Speed pulley drive and power feed; without motors or controls.
|
||||||||
|
17-677
Gang of 4 heads on a sectional production table, 1/2-inch key chucks, high-speed pulley drive and power feed; without motors or controls.
|
||||||||
|
17-680
Gang of 5 heads on a sectional production table, No. 2 Morse taper spindles, Slo-Speed pulley drive and hand feed; without motors or controls.
|
|
|
|
|||||
|
17-681
Gang of 5 heads on a sectional production table, No. 2 Morse taper spindles, high-speed pulley drive and hand feed; without motors or controls.
|
||||||||
|
17-682
Gang of 5 heads on a sectional production table, 1/2-inch key chucks, Slo-Speed pulley drive and hand feed; without motors or controls.
|
||||||||
|
17-683
Gang of 5 heads on a sectional production table, 1/2-inch key chucks, high-speed pulley drive and hand feed; without motors or controls.
|
||||||||
|
17-684
Gang of 5 heads on a sectional production table, No. 2 Morse taper spindles, Slo-Speed pulley drive and power feed; without motors or controls.
|
||||||||
|
17-685
Gang of 5 heads on a sectional production table, No. 2 Morse taper spindles, high-speed pulley drive and power feed; without motors or controls.
|
||||||||
|
17-686
Gang of 5 heads on a sectional production table, 1/2-inch key chucks, Slo-Speed pulley drive and power feed; without motors or controls.
|
||||||||
|
17-687
Gang of 5 heads on a sectional production table, 1/2-inch key chucks, high-speed pulley drive and power feed; without motors or controls.
|
||||||||
|
17-690
Gang of 6 heads on a sectional production table, No. 2 Morse taper spindles, Slo-Speed pulley drive and hand feed; without motors or controls.
|
|
|
|
|||||
|
17-691
Gang of 6 heads on a sectional production table, No. 2 Morse taper spindles, high-speed pulley drive and hand feed; without motors or controls.
|
||||||||
|
17-692
Gang of 6 heads on a sectional production table, 1/2-inch key chucks, Slo-Speed pulley drive and hand feed; without motors or controls.
|
||||||||
|
17-693
Gang of 6 heads on a sectional production table, 1/2-inch key chucks, high-speed pulley drive and hand feed; without motors or controls.
|
||||||||
|
17-694
Gang of 6 heads on a sectional production table, No. 2 Morse taper spindles, Slo-Speed pulley drive and power feed; without motors or controls.
|
||||||||
|
17-695
Gang of 6 heads on a sectional production table, No. 2 Morse taper spindles, high-speed pulley drive and power feed; without motors or controls.
|
||||||||
|
17-696
Gang of 6 heads on a sectional production table, 1/2-inch key chucks, Slo-Speed pulley drive and power feed; without motors or controls.
|
||||||||
|
17-697
Gang of 6 heads on a sectional production table, 1/2-inch key chucks, high-speed pulley drive and power feed; without motors or controls.
|
||||||||
|
17-700
Gang of 8 heads on a sectional production table, No. 2 Morse taper spindles, Slo-Speed pulley drive and hand feed; without motors or controls.
|
||||||||
|
17-701
Gang of 8 heads on a sectional production table, No. 2 Morse taper spindles, high-speed pulley drive and hand feed; without motors or controls.
|
||||||||
|
17-702
Gang of 8 heads on a sectional production table, 1/2-inch key chucks, Slo-Speed pulley drive and hand feed; without motors or controls.
|
||||||||
|
17-703
Gang of 8 heads on a sectional production table, 1/2-inch key chucks, high-speed pulley drive and hand feed; without motors or controls.
|
||||||||
|
17-704
Gang of 8 heads on a sectional production table, No. 2 Morse taper spindles, Slo-Speed pulley drive and power feed; without motors or controls.
|
||||||||
|
17-705
Gang of 8 heads on a sectional production table, No. 2 Morse taper spindles, high-speed pulley drive and power feed; without motors or controls.
|
||||||||
|
17-706
Gang of 8 heads on a sectional production table, 1/2-inch key chucks, Slo-Speed pulley drive and power feed; without motors or controls.
|
||||||||
|
17-707
Gang of 8 heads on a sectional production table, 1/2-inch key chucks, high-speed pulley drive and power feed; without motors or controls.
|
||||||||
|
17-411
Floor model with standard tilting table, No. 2 Morse taper spindle and Slo-Speed step-pulley drive; 1 HP single-phase motor and push-button switch, 115/230 volts, hand feed.
|
|
|
||||||
|
17-412
Floor model with standard tilting table, No. 2 Morse taper spindle and Slo-Speed step-pulley drive; 1 HP single-phase motor and 24-volt magnetic controls, 115/230 volts, hand feed.
|
|
|||||||
|
17-413
Floor model with standard tilting table, No. 2 Morse taper spindle and Slo-Speed step-pulley drive; 1 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, hand feed.
|
||||||||
|
17-415
Floor model with standard tilting table, No. 2 Morse taper spindle and Slo-Speed step-pulley drive; 1 HP single-phase motor and push-button switch, 115/230 volts, power feed.
|
|
|||||||
|
17-416
Floor model with standard tilting table, No. 2 Morse taper spindle and Slo-Speed step-pulley drive; 1 HP single-phase motor and 24-volt magnetic controls, 115/230 volts, power feed.
|
||||||||
|
17-417
Floor model with standard tilting table, No. 2 Morse taper spindle and Slo-Speed step-pulley drive; 1 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, power feed.
|
||||||||
|
17-420
Floor model with production tilting table, No. 2 Morse taper spindle and Slo-Speed step-pulley drive; without motor or controls.
|
|
|
||||||
|
17-421
Floor model with production tilting table, No. 2 Morse taper spindle and Slo-Speed step-pulley drive; 1 HP single-phase motor and push-button switch, 115/230 volts, hand feed.
|
||||||||
|
17-422
Floor model with production tilting table, No. 2 Morse taper spindle and Slo-Speed step-pulley drive; 1 HP single-phase motor and 24-volt magnetic controls, 115/230 volts, hand feed.
|
||||||||
|
17-423
Floor model with production tilting table, No. 2 Morse taper spindle and Slo-Speed step-pulley drive; 1 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, hand feed.
|
||||||||
|
17-425
Floor model with production tilting table, No. 2 Morse taper spindle and Slo-Speed step-pulley drive; 1 HP single-phase motor and push-button switch, 115/230 volts, power feed.
|
|
|
||||||
|
17-426
Floor model with production tilting table, No. 2 Morse taper spindle and Slo-Speed step-pulley drive; 1 HP single-phase motor and 24-volt magnetic controls, 115/230 volts, power feed.
|
||||||||
|
17-427
Floor model with production tilting table, No. 2 Morse taper spindle and Slo-Speed step-pulley drive; 1 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, power feed.
|
||||||||
|
17-430
Head only, No. 2 Morse taper spindle and Slo-Speed step-pulley drive; without motor or controls.
|
|
|
||||||
|
17-431
Head only, No. 2 Morse taper spindle and Slo-Speed step-pulley drive; 1 HP single-phase motor and push-button switch, 115/230 volts, hand feed.
|
||||||||
|
17-432
Head only, No. 2 Morse taper spindle and Slo-Speed step-pulley drive; 1 HP single-phase motor and 24-volt magnetic controls, 115/230 volts, hand feed.
|
||||||||
|
17-433
Head only, No. 2 Morse taper spindle and Slo-Speed step-pulley drive; 1 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, hand feed.
|
||||||||
|
17-435
Head only, No. 2 Morse taper spindle and Slo-Speed step-pulley drive; 1 HP single-phase motor and push-button switch, 115/230 volts, power feed.
|
|
|||||||
|
17-436
Head only, No. 2 Morse taper spindle and Slo-Speed step-pulley drive; 1 HP single-phase motor and 24-volt magnetic controls, 115/230 volts, power feed.
|
||||||||
|
17-437
Head only, No. 2 Morse taper spindle and Slo-Speed step-pulley drive; 1 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, power feed.
|
||||||||
|
17-440
Floor model with standard tilting table, No. 2 Morse taper spindle and high-speed step-pulley drive; without motor or controls.
|
|
|
||||||
|
17-441
Floor model with standard tilting table, No. 2 Morse taper spindle and high-speed step-pulley drive; 1 HP single-phase motor and push-button switch, 115/230 volts, hand feed.
|
||||||||
|
17-442
Floor model with standard tilting table, No. 2 Morse taper spindle and high-speed step-pulley drive; 1 HP single-phase motor and 24-volt magnetic controls, 115/230 volts, hand feed.
|
|
|||||||
|
17-443
Floor model with standard tilting table, No. 2 Morse taper spindle and high-speed step-pulley drive; 1 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, hand feed.
|
|
|||||||
|
17-445
Floor model with standard tilting table, No. 2 Morse taper spindle and high-speed step-pulley drive; 1 HP single-phase motor and push-button switch, 115/230 volts, power feed.
|
|
|||||||
|
17-446
Floor model with standard tilting table, No. 2 Morse taper spindle and high-speed step-pulley drive; 1 HP single-phase motor and 24-volt magnetic controls, 115/230 volts, power feed.
|
|
|||||||
|
17-447
Floor model with standard tilting table, No. 2 Morse taper spindle and high-speed step-pulley drive; 1 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, power feed.
|
||||||||
|
17-450
Floor model with production tilting table, No. 2 Morse taper spindle and high-speed step-pulley drive; without motor or controls.
|
|
|
||||||
|
17-451
Floor model with production tilting table, No. 2 Morse taper spindle and high-speed step-pulley drive; 1 HP single-phase motor and push-button switch, 115/230 volts, hand feed.
|
||||||||
|
17-452
Floor model with production tilting table, No. 2 Morse taper spindle and high-speed step-pulley drive; 1 HP single-phase motor and 24-volt magnetic controls, 115/230 volts, hand feed.
|
||||||||
|
17-453
Floor model with production tilting table, No. 2 Morse taper spindle and high-speed step-pulley drive; 1 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, hand feed.
|
||||||||
|
17-455
Floor model with production tilting table, No. 2 Morse taper spindle and high-speed step-pulley drive; 1 HP single-phase motor and push-button switch, 115/230 volts, power feed.
|
|
|
||||||
|
17-456
Floor model with production tilting table, No. 2 Morse taper spindle and high-speed step-pulley drive; 1 HP single-phase motor and 24-volt magnetic controls, 115/230 volts, power feed.
|
||||||||
|
17-457
Floor model with production tilting table, No. 2 Morse taper spindle and high-speed step-pulley drive; 1 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, power feed.
|
||||||||
|
17-458
Floor model with production tilting table, No. 2 Morse taper spindle and high-speed step-pulley drive; 1 HP three-phase motor and 24-volt magnetic controls, 200 volts, power feed.
|
|
|||||||
|
17-460
Head only, No. 2 Morse taper spindle and high-speed step-pulley drive; without motor or controls.
|
|
|||||||
|
17-461
Head only, No. 2 Morse taper spindle and high-speed step-pulley drive; 1 HP single-phase motor and push-button switch, 115/230 volts, hand feed.
|
||||||||
|
17-462
Head only, No. 2 Morse taper spindle and high-speed step-pulley drive; 1 HP single-phase motor and 24-volt magnetic controls, 115/230 volts, hand feed.
|
||||||||
|
17-463
Head only, No. 2 Morse taper spindle and high-speed step-pulley drive; 1 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, hand feed.
|
||||||||
|
17-465
Head only, No. 2 Morse taper spindle and high-speed step-pulley drive; 1 HP single-phase motor and push-button switch, 115/230 volts, power feed.
|
|
|||||||
|
17-466
Head only, No. 2 Morse taper spindle and high-speed step-pulley drive; 1 HP single-phase motor and 24-volt magnetic controls, 115/230 volts, power feed.
|
||||||||
|
17-467
Head only, No. 2 Morse taper spindle and high-speed step-pulley drive; 1 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, power feed.
|
||||||||
|
17-520
Floor model with standard tilting table, No. 2 Morse taper spindle and variable-speed drive; factory-mounted electricals required.
|
||||||||
|
17-521
Floor model with standard tilting table, No. 2 Morse taper spindle and variable-speed drive; 1 HP single-phase motor and push-button switch, 115/230 volts, hand feed.
|
|
|
||||||
|
17-522
Floor model with standard tilting table, No. 2 Morse taper spindle and variable-speed drive; 1 HP single-phase motor and 24-volt magnetic controls, 115/230 volts, hand feed.
|
||||||||
|
17-523
Floor model with standard tilting table, No. 2 Morse taper spindle and variable-speed drive; 1 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, hand feed.
|
||||||||
|
17-525
Floor model with standard tilting table, No. 2 Morse taper spindle and variable-speed drive; 1 HP single-phase motor and push-button switch, 115/230 volts, power feed.
|
|
|||||||
|
17-526
Floor model with standard tilting table, No. 2 Morse taper spindle and variable-speed drive; 1 HP single-phase motor and 24-volt magnetic controls, 115/230 volts, power feed.
|
||||||||
|
17-527
Floor model with standard tilting table, No. 2 Morse taper spindle and variable-speed drive; 1 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, power feed.
|
||||||||
|
17-528
Floor model with standard tilting table, No. 2 Morse taper spindle and variable-speed drive; 1 HP three-phase motor and 24-volt magnetic controls, 200 volts, power feed.
|
|
|||||||
|
17-531
Floor model with production tilting table, No. 2 Morse taper spindle and variable-speed drive; 1 HP single-phase motor and push-button switch, 115/230 volts, hand feed.
|
|
|||||||
|
17-532
Floor model with production tilting table, No. 2 Morse taper spindle and variable-speed drive; 1 HP single-phase motor and 24-volt magnetic controls, 115/230 volts, hand feed.
|
||||||||
|
17-533
Floor model with production tilting table, No. 2 Morse taper spindle and variable-speed drive; 1 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, hand feed.
|
||||||||
|
17-535
Floor model with production tilting table, No. 2 Morse taper spindle and variable-speed drive; 1 HP single-phase motor and push-button switch, 115/230 volts, power feed.
|
|
|
||||||
|
17-536
Floor model with production tilting table, No. 2 Morse taper spindle and variable-speed drive; 1 HP single-phase motor and 24-volt magnetic controls, 115/230 volts, power feed.
|
||||||||
|
17-537
Floor model with production tilting table, No. 2 Morse taper spindle and variable-speed drive; 1 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, power feed.
|
||||||||
|
17-541
Head only, No. 2 Morse taper spindle and variable-speed drive; 1 HP single-phase motor and push-button switch, 115/230 volts, hand feed.
|
|
|
||||||
|
17-542
Head only, No. 2 Morse taper spindle and variable-speed drive; 1 HP single-phase motor and 24-volt magnetic controls, 115/230 volts, hand feed.
|
||||||||
|
17-543
Head only, No. 2 Morse taper spindle and variable-speed drive; 1 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, hand feed.
|
||||||||
|
17-545
Head only, No. 2 Morse taper spindle and variable-speed drive; 1 HP single-phase motor and push-button switch, 115/230 volts, power feed.
|
|
|||||||
|
17-546
Head only, No. 2 Morse taper spindle and variable-speed drive; 1 HP single-phase motor and 24-volt magnetic controls, 115/230 volts, power feed.
|
||||||||
|
17-547
Head only, No. 2 Morse taper spindle and variable-speed drive; 1 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, power feed.
|