| Catalog number | 1957 | 1963 | 1965 | 1982 | 1988 | 1995 |
|---|---|---|---|---|---|---|
|
20-422
Gang of 2 heads on a production table, No. 2 Morse taper spindles, standard spindle pulleys and hand feed; without motors or controls.
|
|
|
|
|||
|
20-423
Gang of 3 heads on a production table, No. 2 Morse taper spindles, standard spindle pulleys and hand feed; without motors or controls.
|
||||||
|
20-424
Gang of 4 heads on a production table, No. 2 Morse taper spindles, standard spindle pulleys and hand feed; without motors or controls.
|
||||||
|
20-426
Gang of 6 heads on a production table, No. 2 Morse taper spindles, standard spindle pulleys and hand feed; without motors or controls.
|
||||||
|
20-427
Head only, with standard spindle pulley and No. 2 Morse-taper spindle; column, table, raising mechanism, motor and controls extra.
|
|
|||||
|
20-428
Bench model with production table, No. 2 Morse taper spindle, standard spindle pulley and hand feed; without motor or controls.
|
|
|||||
|
20-431
Floor model with production table, No. 3 Morse taper spindle, standard spindle pulley and hand feed; without motor or controls.
|
||||||
|
20-432
Gang of 2 heads on a production table, No. 3 Morse taper spindles, standard spindle pulleys and hand feed; without motors or controls.
|
||||||
|
20-433
Gang of 3 heads on a production table, No. 3 Morse taper spindles, standard spindle pulleys and hand feed; without motors or controls.
|
||||||
|
20-434
Gang of 4 heads on a production table, No. 3 Morse taper spindles, standard spindle pulleys and hand feed; without motors or controls.
|
||||||
|
20-436
Gang of 6 heads on a production table, No. 3 Morse taper spindles, standard spindle pulleys and hand feed; without motors or controls.
|
||||||
|
20-437
Head only, No. 3 Morse taper spindle, standard spindle pulley and hand feed; without motor or controls.
|
|
|||||
|
20-438
Bench model with production table, No. 3 Morse taper spindle, standard spindle pulley and hand feed; without motor or controls.
|
|
|||||
|
20-425
Floor model with tilting table, No. 2 Morse taper spindle, standard spindle pulley and hand feed; without motor or controls.
|
||||||
|
20-435
Floor model with tilting table, No. 3 Morse taper spindle, standard spindle pulley and hand feed; without motor or controls.
|
||||||
|
20-441
Floor model with production table, No. 2 Morse taper spindle, geared spindle pulley and hand feed; without motor or controls.
|
||||||
|
20-442
Gang of 2 heads on a production table, No. 2 Morse taper spindles, geared spindle pulleys and hand feed; without motors or controls.
|
||||||
|
20-443
Gang of 3 heads on a production table, No. 2 Morse taper spindles, geared spindle pulleys and hand feed; without motors or controls.
|
||||||
|
20-444
Gang of 4 heads on a production table, No. 2 Morse taper spindles, geared spindle pulleys and hand feed; without motors or controls.
|
||||||
|
20-445
Floor model with tilting table, No. 2 Morse taper spindle, geared spindle pulley and hand feed; without motor or controls.
|
||||||
|
20-446
Gang of 6 heads on a production table, No. 2 Morse taper spindles, geared spindle pulleys and hand feed; without motors or controls.
|
||||||
|
20-447
Head only, No. 2 Morse taper spindle, geared spindle pulley and hand feed; without motor or controls.
|
||||||
|
20-448
Bench model with production table, No. 2 Morse taper spindle, geared spindle pulley and hand feed; without motor or controls.
|
||||||
|
20-451
Floor model with production table, No. 3 Morse taper spindle, geared spindle pulley and hand feed; without motor or controls.
|
||||||
|
20-452
Gang of 2 heads on a production table, No. 3 Morse taper spindles, geared spindle pulleys and hand feed; without motors or controls.
|
||||||
|
20-453
Gang of 3 heads on a production table, No. 3 Morse taper spindles, geared spindle pulleys and hand feed; without motors or controls.
|
||||||
|
20-454
Gang of 4 heads on a production table, No. 3 Morse taper spindles, geared spindle pulleys and hand feed; without motors or controls.
|
||||||
|
20-455
Floor model with tilting table, No. 3 Morse taper spindle, geared spindle pulley and hand feed; without motor or controls.
|
||||||
|
20-456
Gang of 6 heads on a production table, No. 3 Morse taper spindles, geared spindle pulleys and hand feed; without motors or controls.
|
||||||
|
20-457
Head only, No. 3 Morse taper spindle, geared spindle pulley and hand feed; without motor or controls.
|
||||||
|
20-458
Bench model with production table, No. 3 Morse taper spindle, geared spindle pulley and hand feed; without motor or controls.
|
||||||
|
20-721
Floor model with production table, No. 2 Morse taper spindle, standard spindle pulley and power feed; without motor or controls.
|
||||||
|
20-722
Gang of 2 heads on a production table, No. 2 Morse taper spindles, standard spindle pulleys and power feed; without motors or controls.
|
||||||
|
20-723
Gang of 3 heads on a production table, No. 2 Morse taper spindles, standard spindle pulleys and power feed; without motors or controls.
|
||||||
|
20-724
Gang of 4 heads on a production table, No. 2 Morse taper spindles, standard spindle pulleys and power feed; without motors or controls.
|
||||||
|
20-725
Floor model with tilting table, No. 2 Morse taper spindle, standard spindle pulley and power feed; without motor or controls.
|
||||||
|
20-726
Gang of 6 heads on a production table, No. 2 Morse taper spindles, standard spindle pulleys and power feed; without motors or controls.
|
||||||
|
20-727
Head only, No. 2 Morse taper spindle, standard spindle pulley and power feed; without motor or controls.
|
||||||
|
20-728
Bench model with production table, No. 2 Morse taper spindle, standard spindle pulley and power feed; without motor or controls.
|
||||||
|
20-731
Floor model with production table, No. 3 Morse taper spindle, standard spindle pulley and power feed; without motor or controls.
|
||||||
|
20-732
Gang of 2 heads on a production table, No. 3 Morse taper spindles, standard spindle pulleys and power feed; without motors or controls.
|
||||||
|
20-733
Gang of 3 heads on a production table, No. 3 Morse taper spindles, standard spindle pulleys and power feed; without motors or controls.
|
||||||
|
20-734
Gang of 4 heads on a production table, No. 3 Morse taper spindles, standard spindle pulleys and power feed; without motors or controls.
|
||||||
|
20-735
Floor model with tilting table, No. 3 Morse taper spindle, standard spindle pulley and power feed; without motor or controls.
|
||||||
|
20-736
Gang of 6 heads on a production table, No. 3 Morse taper spindles, standard spindle pulleys and power feed; without motors or controls.
|
||||||
|
20-737
Head only, No. 3 Morse taper spindle, standard spindle pulley and power feed; without motor or controls.
|
||||||
|
20-738
Bench model with production table, No. 3 Morse taper spindle, standard spindle pulley and power feed; without motor or controls.
|
||||||
|
20-741
Floor model with production table, No. 2 Morse taper spindle, geared spindle pulley and power feed; without motor or controls.
|
||||||
|
20-742
Gang of 2 heads on a production table, No. 2 Morse taper spindles, geared spindle pulleys and power feed; without motors or controls.
|
||||||
|
20-743
Gang of 3 heads on a production table, No. 2 Morse taper spindles, geared spindle pulleys and power feed; without motors or controls.
|
||||||
|
20-744
Gang of 4 heads on a production table, No. 2 Morse taper spindles, geared spindle pulleys and power feed; without motors or controls.
|
||||||
|
20-745
Floor model with tilting table, No. 2 Morse taper spindle, geared spindle pulley and power feed; without motor or controls.
|
||||||
|
20-746
Gang of 6 heads on a production table, No. 2 Morse taper spindles, geared spindle pulleys and power feed; without motors or controls.
|
||||||
|
20-747
Head only, No. 2 Morse taper spindle, geared spindle pulley and power feed; without motor or controls.
|
||||||
|
20-748
Bench model with production table, No. 2 Morse taper spindle, geared spindle pulley and power feed; without motor or controls.
|
||||||
|
20-751
Floor model with production table, No. 3 Morse taper spindle, geared spindle pulley and power feed; without motor or controls.
|
||||||
|
20-752
Gang of 2 heads on a production table, No. 3 Morse taper spindles, geared spindle pulleys and power feed; without motors or controls.
|
||||||
|
20-753
Gang of 3 heads on a production table, No. 3 Morse taper spindles, geared spindle pulleys and power feed; without motors or controls.
|
||||||
|
20-754
Gang of 4 heads on a production table, No. 3 Morse taper spindles, geared spindle pulleys and power feed; without motors or controls.
|
||||||
|
20-755
Floor model with tilting table, No. 3 Morse taper spindle, geared spindle pulley and power feed; without motor or controls.
|
||||||
|
20-756
Gang of 6 heads on a production table, No. 3 Morse taper spindles, geared spindle pulleys and power feed; without motors or controls.
|
||||||
|
20-757
Head only, No. 3 Morse taper spindle, geared spindle pulley and power feed; without motor or controls.
|
||||||
|
20-758
Bench model with production table, No. 3 Morse taper spindle, geared spindle pulley and power feed; without motor or controls.
|
||||||
|
70-211
Series 2000 floor model with production table, No. 3 Morse taper spindle, 3:1 reduction low-speed eight-step pulley drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, hand feed.
|
|
|
|
|||
|
70-212
Series 2000 floor model with production table, No. 3 Morse taper spindle, 3:1 reduction low-speed eight-step pulley drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, hand feed.
|
||||||
|
70-213
Series 2000 floor model with production table, No. 3 Morse taper spindle, 3:1 reduction low-speed eight-step pulley drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, hand feed.
|
||||||
|
70-215
Series 2000 floor model with production table, No. 3 Morse taper spindle, 3:1 reduction low-speed eight-step pulley drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, power feed.
|
|
|||||
|
70-216
Series 2000 floor model with production table, No. 3 Morse taper spindle, 3:1 reduction low-speed eight-step pulley drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, power feed.
|
|
|||||
|
70-217
Series 2000 floor model with production table, No. 3 Morse taper spindle, 3:1 reduction low-speed eight-step pulley drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, power feed.
|
||||||
|
70-220
Series 2000 floor model with standard tilting table, No. 3 Morse taper spindle, 3:1 reduction low-speed eight-step pulley drive; without motor or controls.
|
|
|
||||
|
70-221
Series 2000 floor model with standard tilting table, No. 3 Morse taper spindle, 3:1 reduction low-speed eight-step pulley drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, hand feed.
|
||||||
|
70-222
Series 2000 floor model with standard tilting table, No. 3 Morse taper spindle, 3:1 reduction low-speed eight-step pulley drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, hand feed.
|
|
|||||
|
70-223
Series 2000 floor model with standard tilting table, No. 3 Morse taper spindle, 3:1 reduction low-speed eight-step pulley drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, hand feed.
|
||||||
|
70-225
Series 2000 floor model with standard tilting table, No. 3 Morse taper spindle, 3:1 reduction low-speed eight-step pulley drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, power feed.
|
|
|
||||
|
70-226
Series 2000 floor model with standard tilting table, No. 3 Morse taper spindle, 3:1 reduction low-speed eight-step pulley drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, power feed.
|
||||||
|
70-227
Series 2000 floor model with standard tilting table, No. 3 Morse taper spindle, 3:1 reduction low-speed eight-step pulley drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, power feed.
|
||||||
|
70-230
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, 3:1 reduction low-speed eight-step pulley drive; without motor or controls.
|
|
|
||||
|
70-231
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, 3:1 reduction low-speed eight-step pulley drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, hand feed.
|
||||||
|
70-232
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, 3:1 reduction low-speed eight-step pulley drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, hand feed.
|
||||||
|
70-233
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, 3:1 reduction low-speed eight-step pulley drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, hand feed.
|
||||||
|
70-235
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, 3:1 reduction low-speed eight-step pulley drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, power feed.
|
|
|||||
|
70-236
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, 3:1 reduction low-speed eight-step pulley drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, power feed.
|
|
|||||
|
70-237
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, 3:1 reduction low-speed eight-step pulley drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, power feed.
|
||||||
|
70-240
Series 2000 floor model with production table, No. 3 Morse taper spindle, 2:1 reduction low-speed eight-step pulley drive; without motor or controls.
|
||||||
|
70-241
Series 2000 floor model with production table, No. 3 Morse taper spindle, 2:1 reduction low-speed eight-step pulley drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, hand feed.
|
||||||
|
70-242
Series 2000 floor model with production table, No. 3 Morse taper spindle, 2:1 reduction low-speed eight-step pulley drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, hand feed.
|
||||||
|
70-243
Series 2000 floor model with production table, No. 3 Morse taper spindle, 2:1 reduction low-speed eight-step pulley drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, hand feed.
|
||||||
|
70-245
Series 2000 floor model with production table, No. 3 Morse taper spindle, 2:1 reduction low-speed eight-step pulley drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, power feed.
|
||||||
|
70-246
Series 2000 floor model with production table, No. 3 Morse taper spindle, 2:1 reduction low-speed eight-step pulley drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, power feed.
|
|
|||||
|
70-247
Series 2000 floor model with production table, No. 3 Morse taper spindle, 2:1 reduction low-speed eight-step pulley drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, power feed.
|
||||||
|
70-250
Series 2000 floor model with standard tilting table, No. 3 Morse taper spindle, 2:1 reduction low-speed eight-step pulley drive; without motor or controls.
|
|
|
||||
|
70-251
Series 2000 floor model with standard tilting table, No. 3 Morse taper spindle, 2:1 reduction low-speed eight-step pulley drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, hand feed.
|
||||||
|
70-252
Series 2000 floor model with standard tilting table, No. 3 Morse taper spindle, 2:1 reduction low-speed eight-step pulley drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, hand feed.
|
|
|||||
|
70-253
Series 2000 floor model with standard tilting table, No. 3 Morse taper spindle, 2:1 reduction low-speed eight-step pulley drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, hand feed.
|
||||||
|
70-255
Series 2000 floor model with standard tilting table, No. 3 Morse taper spindle, 2:1 reduction low-speed eight-step pulley drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, power feed.
|
|
|||||
|
70-256
Series 2000 floor model with standard tilting table, No. 3 Morse taper spindle, 2:1 reduction low-speed eight-step pulley drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, power feed.
|
||||||
|
70-257
Series 2000 floor model with standard tilting table, No. 3 Morse taper spindle, 2:1 reduction low-speed eight-step pulley drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, power feed.
|
||||||
|
70-260
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, 2:1 reduction low-speed eight-step pulley drive; without motor or controls.
|
|
|
||||
|
70-261
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, 2:1 reduction low-speed eight-step pulley drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, hand feed.
|
||||||
|
70-262
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, 2:1 reduction low-speed eight-step pulley drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, hand feed.
|
||||||
|
70-263
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, 2:1 reduction low-speed eight-step pulley drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, hand feed.
|
||||||
|
70-265
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, 2:1 reduction low-speed eight-step pulley drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, power feed.
|
|
|
||||
|
70-266
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, 2:1 reduction low-speed eight-step pulley drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, power feed.
|
||||||
|
70-267
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, 2:1 reduction low-speed eight-step pulley drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, power feed.
|
||||||
|
70-270
Series 2000 floor model with production table, No. 3 Morse taper spindle, direct-drive high-speed eight-step pulley drive; without motor or controls.
|
|
|||||
|
70-271
Series 2000 floor model with production table, No. 3 Morse taper spindle, direct-drive high-speed eight-step pulley drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, hand feed.
|
||||||
|
70-272
Series 2000 floor model with production table, No. 3 Morse taper spindle, direct-drive high-speed eight-step pulley drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, hand feed.
|
|
|||||
|
70-273
Series 2000 floor model with production table, No. 3 Morse taper spindle, direct-drive high-speed eight-step pulley drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, hand feed.
|
||||||
|
70-275
Series 2000 floor model with production table, No. 3 Morse taper spindle, direct-drive high-speed eight-step pulley drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, power feed.
|
|
|||||
|
70-276
Series 2000 floor model with production table, No. 3 Morse taper spindle, direct-drive high-speed eight-step pulley drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, power feed.
|
||||||
|
70-277
Series 2000 floor model with production table, No. 3 Morse taper spindle, direct-drive high-speed eight-step pulley drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, power feed.
|
|
|||||
|
70-280
Series 2000 floor model with standard tilting table, No. 3 Morse taper spindle, direct-drive high-speed eight-step pulley drive; without motor or controls.
|
|
|||||
|
70-281
Series 2000 floor model with standard tilting table, No. 3 Morse taper spindle, direct-drive high-speed eight-step pulley drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, hand feed.
|
||||||
|
70-282
Series 2000 floor model with standard tilting table, No. 3 Morse taper spindle, direct-drive high-speed eight-step pulley drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, hand feed.
|
|
|||||
|
70-283
Series 2000 floor model with standard tilting table, No. 3 Morse taper spindle, direct-drive high-speed eight-step pulley drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, hand feed.
|
||||||
|
70-285
Series 2000 floor model with standard tilting table, No. 3 Morse taper spindle, direct-drive high-speed eight-step pulley drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, power feed.
|
|
|
||||
|
70-286
Series 2000 floor model with standard tilting table, No. 3 Morse taper spindle, direct-drive high-speed eight-step pulley drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, power feed.
|
||||||
|
70-287
Series 2000 floor model with standard tilting table, No. 3 Morse taper spindle, direct-drive high-speed eight-step pulley drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, power feed.
|
||||||
|
70-290
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, direct-drive high-speed eight-step pulley drive; without motor or controls.
|
|
|
||||
|
70-291
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, direct-drive high-speed eight-step pulley drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, hand feed.
|
||||||
|
70-292
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, direct-drive high-speed eight-step pulley drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, hand feed.
|
|
|||||
|
70-293
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, direct-drive high-speed eight-step pulley drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, hand feed.
|
||||||
|
70-295
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, direct-drive high-speed eight-step pulley drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, power feed.
|
|
|
||||
|
70-296
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, direct-drive high-speed eight-step pulley drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, power feed.
|
||||||
|
70-297
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, direct-drive high-speed eight-step pulley drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, power feed.
|
||||||
|
70-301
Series 2000 floor model with production table, No. 3 Morse taper spindle, 3:1 reduction low-speed variable-speed drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, hand feed.
|
|
|
||||
|
70-302
Series 2000 floor model with production table, No. 3 Morse taper spindle, 3:1 reduction low-speed variable-speed drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, hand feed.
|
||||||
|
70-303
Series 2000 floor model with production table, No. 3 Morse taper spindle, 3:1 reduction low-speed variable-speed drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, hand feed.
|
||||||
|
70-305
Series 2000 floor model with production table, No. 3 Morse taper spindle, 3:1 reduction low-speed variable-speed drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, power feed.
|
|
|
||||
|
70-306
Series 2000 floor model with production table, No. 3 Morse taper spindle, 3:1 reduction low-speed variable-speed drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, power feed.
|
||||||
|
70-307
Series 2000 floor model with production table, No. 3 Morse taper spindle, 3:1 reduction low-speed variable-speed drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, power feed.
|
||||||
|
70-331
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, 3:1 reduction low-speed variable-speed drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, hand feed.
|
|
|
||||
|
70-332
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, 3:1 reduction low-speed variable-speed drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, hand feed.
|
||||||
|
70-333
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, 3:1 reduction low-speed variable-speed drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, hand feed.
|
||||||
|
70-335
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, 3:1 reduction low-speed variable-speed drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, power feed.
|
|
|||||
|
70-336
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, 3:1 reduction low-speed variable-speed drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, power feed.
|
|
|||||
|
70-337
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, 3:1 reduction low-speed variable-speed drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, power feed.
|
||||||
|
70-341
Series 2000 floor model with production table, No. 3 Morse taper spindle, 2:1 reduction low-speed variable-speed drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, hand feed.
|
|
|
||||
|
70-342
Series 2000 floor model with production table, No. 3 Morse taper spindle, 2:1 reduction low-speed variable-speed drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, hand feed.
|
||||||
|
70-343
Series 2000 floor model with production table, No. 3 Morse taper spindle, 2:1 reduction low-speed variable-speed drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, hand feed.
|
||||||
|
70-345
Series 2000 floor model with production table, No. 3 Morse taper spindle, 2:1 reduction low-speed variable-speed drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, power feed.
|
|
|
||||
|
70-346
Series 2000 floor model with production table, No. 3 Morse taper spindle, 2:1 reduction low-speed variable-speed drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, power feed.
|
||||||
|
70-347
Series 2000 floor model with production table, No. 3 Morse taper spindle, 2:1 reduction low-speed variable-speed drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, power feed.
|
||||||
|
70-351
Series 2000 floor model with tilting table, No. 3 Morse taper spindle, 2:1 reduction low-speed variable-speed drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, hand feed.
|
|
|
||||
|
70-352
Series 2000 floor model with tilting table, No. 3 Morse taper spindle, 2:1 reduction low-speed variable-speed drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, hand feed.
|
||||||
|
70-353
Series 2000 floor model with tilting table, No. 3 Morse taper spindle, 2:1 reduction low-speed variable-speed drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, hand feed.
|
||||||
|
70-355
Series 2000 floor model with tilting table, No. 3 Morse taper spindle, 2:1 reduction low-speed variable-speed drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, power feed.
|
|
|
||||
|
70-356
Series 2000 floor model with tilting table, No. 3 Morse taper spindle, 2:1 reduction low-speed variable-speed drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, power feed.
|
||||||
|
70-357
Series 2000 floor model with tilting table, No. 3 Morse taper spindle, 2:1 reduction low-speed variable-speed drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, power feed.
|
||||||
|
70-361
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, 2:1 reduction low-speed variable-speed drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, hand feed.
|
|
|
||||
|
70-362
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, 2:1 reduction low-speed variable-speed drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, hand feed.
|
||||||
|
70-363
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, 2:1 reduction low-speed variable-speed drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, hand feed.
|
||||||
|
70-365
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, 2:1 reduction low-speed variable-speed drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, power feed.
|
|
|||||
|
70-366
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, 2:1 reduction low-speed variable-speed drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, power feed.
|
||||||
|
70-367
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, 2:1 reduction low-speed variable-speed drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, power feed.
|
|
|||||
|
70-371
Series 2000 floor model with production table, No. 3 Morse taper spindle, direct-drive high-speed variable-speed drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, hand feed.
|
|
|||||
|
70-372
Series 2000 floor model with production table, No. 3 Morse taper spindle, direct-drive high-speed variable-speed drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, hand feed.
|
||||||
|
70-373
Series 2000 floor model with production table, No. 3 Morse taper spindle, direct-drive high-speed variable-speed drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, hand feed.
|
||||||
|
70-375
Series 2000 floor model with production table, No. 3 Morse taper spindle, direct-drive high-speed variable-speed drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, power feed.
|
|
|
||||
|
70-376
Series 2000 floor model with production table, No. 3 Morse taper spindle, direct-drive high-speed variable-speed drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, power feed.
|
||||||
|
70-377
Series 2000 floor model with production table, No. 3 Morse taper spindle, direct-drive high-speed variable-speed drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, power feed.
|
||||||
|
70-381
Series 2000 floor model with tilting table, No. 3 Morse taper spindle, direct-drive high-speed variable-speed drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, hand feed.
|
|
|
||||
|
70-382
Series 2000 floor model with tilting table, No. 3 Morse taper spindle, direct-drive high-speed variable-speed drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, hand feed.
|
||||||
|
70-383
Series 2000 floor model with tilting table, No. 3 Morse taper spindle, direct-drive high-speed variable-speed drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, hand feed.
|
||||||
|
70-385
Series 2000 floor model with tilting table, No. 3 Morse taper spindle, direct-drive high-speed variable-speed drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, power feed.
|
|
|
||||
|
70-386
Series 2000 floor model with tilting table, No. 3 Morse taper spindle, direct-drive high-speed variable-speed drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, power feed.
|
||||||
|
70-387
Series 2000 floor model with tilting table, No. 3 Morse taper spindle, direct-drive high-speed variable-speed drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, power feed.
|
||||||
|
70-391
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, direct-drive high-speed variable-speed drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, hand feed.
|
|
|
||||
|
70-392
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, direct-drive high-speed variable-speed drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, hand feed.
|
||||||
|
70-393
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, direct-drive high-speed variable-speed drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, hand feed.
|
||||||
|
70-395
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, direct-drive high-speed variable-speed drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, power feed.
|
|
|
||||
|
70-396
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, direct-drive high-speed variable-speed drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, power feed.
|
||||||
|
70-397
Series 2000, head only without raising mechanism, No. 3 Morse taper spindle, direct-drive high-speed variable-speed drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, power feed.
|
||||||
|
70-321
Series 2000 floor model with tilting table, No. 3 Morse taper spindle, 3:1 reduction low-speed variable-speed drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, hand feed.
|
|
|||||
|
70-322
Series 2000 floor model with tilting table, No. 3 Morse taper spindle, 3:1 reduction low-speed variable-speed drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, hand feed.
|
|
|||||
|
70-325
Series 2000 floor model with tilting table, No. 3 Morse taper spindle, 3:1 reduction low-speed variable-speed drive; 1-1/2 HP single-phase motor and push-button switch, 230 volts, power feed.
|
||||||
|
70-326
Series 2000 floor model with tilting table, No. 3 Morse taper spindle, 3:1 reduction low-speed variable-speed drive; 1-1/2 HP single-phase motor and 24-volt magnetic controls, 230 volts, power feed.
|
|
|||||
|
20-521
Configuration not specified in parts sheet.
|
||||||
|
20-525
Configuration not specified in parts sheet.
|
||||||
|
20-528
Configuration not specified in parts sheet.
|
||||||
|
20-531
Configuration not specified in parts sheet.
|
||||||
|
20-535
Configuration not specified in parts sheet.
|
||||||
|
20-538
Configuration not specified in parts sheet.
|
||||||
|
70-323
Series 2000 floor model with tilting table, No. 3 Morse taper spindle, 3:1 reduction low-speed variable-speed drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, hand feed.
|
||||||
|
70-327
Series 2000 floor model with tilting table, No. 3 Morse taper spindle, 3:1 reduction low-speed variable-speed drive; 1-1/2 HP three-phase motor and 24-volt magnetic controls with three-leg overload protection, 208-230/460 volts, power feed.
|